Planting Pollinator Habitat on Field Edges

A strip that earns its keep

FARGO, North Dakota — That strip of ground between your crop and the fence line is probably doing very little for you. It grows weeds, catches windblown trash and maybe grows a thistle patch. Turn it into pollinator habitat and it can feed native bees, support beneficial insects and help hold soil, all without taking real production out of your best acres.

Habitat plantings fail more often from poor prep than poor seed. Here's how to set one up so it's still blooming in a few years.

Choose the right spot and size

Pollinators need food, shelter and safety, so start with places that already fit your operation. Field borders, waterway edges, odd corners, filter strips and the ground around ponds work well. Pick areas that are hard to farm anyway, like wet spots, rocky patches and awkward point rows.

Strips don't need to be huge to help, but wider is generally better, and several linked plantings beat one isolated one. Check how your site drains and how much sun it gets. Use the Web Soil Survey to look up the soils on your site, since soil type affects which species will thrive.

Think about the neighbors as well. Plant away from areas that get regular spray drift if you can, and talk to anyone who applies pesticides nearby about the planting.

Pick a seed mix that blooms in sequence

Pollinators need something in flower from spring to fall. A good mix includes native wildflowers and some native grasses, chosen for your region and soil. Aim for early, mid and late blooms so there's always something for the bees.

Questions to ask any seed supplier:

  1. Is this mix suited to my region and soil type?
  2. Where did the seed originate? Local-source seed often performs well.
  3. What's the seeding rate, and how many species are in it?
  4. Does it list the percentage of pure live seed, not just weight?

Your local NRCS office and extension staff can recommend regionally appropriate mixes. The Natural Resources Conservation Service has planting guides for each state, and ATTRA offers guidance on beneficial insect habitat.

Prepare the seedbed properly

This is where most plantings succeed or fail. Native wildflower seed is small and slow, and it can't compete with established grass and weeds.

Steps that work:

  1. Kill existing sod and weeds. Start the season before planting if you can. Use repeated tillage or an herbicide labeled for the site, and follow the label.
  2. Control the seedbank. If a flush of weeds comes up after the first pass, control it again.
  3. Firm the seedbed. Seed needs good contact with soil, not a fluffy bed. You should leave only a slight footprint when you walk on it.
  4. Seed shallow. Many wildflower seeds need light, so broadcast and lightly press them in rather than burying them.

Some species need a winter cold period to germinate, which is why many growers seed in late fall, called dormant seeding. Your seed supplier or extension office can tell you the best timing for your region.

Manage weeds in the first seasons

Don't panic if the first year looks like a weed patch. Native plants put energy into roots before they show much above ground. A common approach is to mow the planting high, above the height of the young seedlings, whenever weeds start shading them. That cuts off weed seed heads and lets light reach the new plants.

Spot-treat problem weeds such as thistle carefully, and avoid broadcast herbicides that can kill the wildflowers. Check any product label before using it on the site. The EPA pesticide pages explain how labels work and what pollinator protections apply.

By the second and third year, the planting should bloom more heavily. After that, periodic mowing, burning or other management, timed outside peak bloom and nesting season, keeps the stand healthy. Ask your conservation staff what suits your area.

Protect the pollinators you attract

A flower strip beside a freshly sprayed field is a trap. If you spray insecticide, read the label for pollinator warnings and follow them. Avoid applying when plants nearby are blooming, and watch wind speed and direction to limit drift. Evening or early morning applications, when bees aren't foraging, are often safer, though the label rules always come first.

Leave some bare ground and dead stems, too. Many native bees nest in the ground or in hollow stems, so a too-tidy strip does them no favors.

If you want help covering costs, ask about cost-share practices through farmers.gov conservation programs. Sign-up details and payment levels change, so ask your service center for the current picture.

Plant the corner no one wants, keep the mower high, and let the bees do their job.