What is the best way to cool cows?
Wet the cow, then move air over her
MODESTO, California — The most effective way to cool dairy cows combines water and moving air. Soak the cow's skin and hair with sprinklers or soakers, then run fans so the water evaporates and takes heat with it. Shade helps by cutting the sun's load, but it doesn't remove the heat the cow makes on her own. Fans alone help a little, and sprinklers alone in still, humid air can just make a wet cow, so the combination is what works.
Where you put the cooling matters as much as the equipment. Put it where cows spend time and where they're most stressed.
Prioritize the right locations
The holding pen is typically the first place to cool, because cows are crowded together, waiting, and generating heat. The feed line is next, since cows standing at the bunk can be soaked and fanned while they eat, and wetting there encourages intake. Then add cooling over the resting area, especially for fresh and high-producing cows. The exit lane after milking is a good place for a quick soak because cows stand there when they might otherwise lie down right away. Work out priorities by walking the barn in the hottest part of the day and watching where cows bunch and pant.
Sprinklers and fans together
Typical systems use a timed cycle: sprinklers wet the cow for a short period, then turn off while fans run for a longer period so the water evaporates. Ask your equipment dealer and extension specialist for suitable cycle times and nozzle settings for your climate; they vary with humidity and temperature. Use large, well-aimed fans that move air down toward the cows at working speed. Poor aim and blocked airflow waste money. Sprinkler water should reach the skin, not just mist the hair tops, but should not soak bedding in the freestalls, because wet beds mean mastitis problems. Use drains and manage water to avoid mud.
Shade and structure
Shade structures cut direct sunlight and are most valuable in dry lots and pastures. A tall, open structure lets air pass through, and orientation and materials affect results. Barn design affects cooling too: tall sidewalls, open ridges and good natural ventilation are the base. Tunnel ventilation or other forced systems are used in some places, and they take careful engineering. Before you build, talk to an agricultural engineer through your extension service. Extension and Wisconsin Extension are places to look for guidance. Consider that cooling investments can also help dry cows and close-up heifers.
Don't forget water and feed
Cooling isn't just air and water for the skin; she needs to drink a lot. Provide plenty of clean troughs with good flow and cool water where you can. Work with a nutritionist on rations that account for lower intake in heat, and feed at cooler times. Keep feed fresh, and clear out spoiled leftovers. All of these combine with physical cooling to keep production and fertility from sliding. Heat stress effects can linger on breeding success, so protecting the cooling system in a heat wave has returns long after the weather turns.
Make it affordable and reliable
Cooling equipment costs money to buy, run and maintain, and it needs to work when the temperature spikes. Check pumps, nozzles, timers and fans before the season, and keep spares for parts that fail. Consider a backup power source. For financing equipment, ask your lender and your NRCS office about conservation or efficiency programs that might apply, since terms change and eligibility varies. Ask your power company about rates and energy efficiency programs too. Track results: milk per cow, conception rates and cow comfort. If a pen doesn't improve, change one variable and recheck.
Quick questions to ask a dealer:
- What airflow rate will this fan produce at the cow?
- How should I set the sprinkler on and off times for my humidity?
- What will it cost to run per season?
- What maintenance does it need, and who services it?