What is the best way to cut cheese curd?

Cut gently, evenly and at the right set

BRODHEAD, Wisconsin — The best way to cut cheese curd is gently and evenly, after the curd has set firmly enough to break cleanly, using a harp or knife sized for your vat. Uneven cuts give uneven curd, uneven moisture and uneven cheese. Most mistakes come from cutting too early, cutting too fast, or using the wrong cutter for the curd you want.

Check the set before you cut

Your recipe tells you the target set time and how firm the curd should be. A common test is the clean break: slide a clean thumb or knife into the curd and lift. If the curd splits cleanly and whey fills the gap, it's ready. If it crumbles or tears, wait. Cutting too early loses fat and protein to the whey. Waiting too long makes the curd tough and harder to cut evenly.

Choose the right tool

Curd harps and knives have different wires or blades for different curd sizes. Vertical and horizontal harps cut in two directions, and a combined system cuts both. Smaller cuts give drier cheese, since smaller pieces expel more whey. Large cuts keep more moisture, as in soft cheeses. Recipes specify cut size, so follow yours rather than guessing.

Technique

  1. Cut vertically first, with steady, even strokes across the whole vat.
  2. Cut horizontally by passing the harp from one end to the other at a moderate speed.
  3. Re-cut any large pieces you missed, slowly, near the edges and corners.
  4. Let the curds rest briefly before stirring, so cut surfaces firm up.

Fast cutting shatters curd and produces fines, which end up in the whey. Slow and steady keeps yield up. Rake or stir gently once the cut is complete.

Keep tools clean and in good shape

Wires should be tight and straight, and the frame sanitized before each use. Check them before every make for kinks, rust or loose fittings. Wire fatigue and bent frames cause uneven cuts, and broken wire fragments in a vat are a food safety hazard. Store harps hung up, not rattling in a drawer. If you're setting up a plant, ask your regulator about acceptable tool materials. The USDA AMS and FSIS pages give a general reference on standards and food safety.

Practice and adjust

Watch for curd size: after cutting, pieces should look uniform. Take notes on cut size, cutting time and the finished cheese. If your cheese is too wet or too dry, adjust cut size slightly and see what happens. Change one thing at a time. The eXtension dairy resources and Cornell Small Farms can point you to training courses and cheesemaking workshops.

Know your vat

Some vats have built-in agitators and cutting systems, and others rely on handheld harps. If you cut by hand, use both hands and a steady stance. A tall vat takes a long reach, so a step stool can help avoid leaning. Safe, steady cutting beats a quick, sloppy job.

Match cutting to the style

Different cheeses need different cut sizes. Fresh and soft cheeses use large curd to hold moisture, while hard cheeses use smaller curd to expel whey. Your recipe will give a target size, often described by comparison to a familiar object such as a pea or a kernel of rice. Practice a few times with water-filled tubs or leftover curd to get your timing and stroke right before you do it on a full batch.

Watch for the whey

After cutting, the whey should look a clear greenish yellow. If it's cloudy and white, you're losing fat and fines, which usually means cutting too early or too roughly. Note what you see and adjust next time. Small improvements in cutting lift yield, and yield is money.

Scale it to your vat

A tool that works in a small farmstead vat may be too short or too light for a larger one, and the reverse is also true. Measure your vat's length, width and depth before ordering a harp, and ask the maker whether the frame and wire spacing fit your vat. A harp that drags on the bottom or scrapes the sides ruins curd and scratches steel.

Curd cuts cleanly when it's ready, and it tells you plainly when it isn't.