What is the best way to test feed for mycotoxins?

Sample well, then pick the method

AMES, Iowa — The best way to test feed for mycotoxins starts before the lab: get a sample that truly represents the feed, because mycotoxins are spread unevenly in a pile or field, and a bad sample gives a useless answer. After that, use a lab method suited to the toxins you suspect, and read the result with your nutritionist and vet.

A great test of a poor sample is still a poor test.

Why sampling is the hard part

Mycotoxins cluster in hot spots, such as moldy kernels or damp pockets in a pile. A scoop from one place can miss them or overstate them. Take many small subsamples from different locations and depths, from the whole lot, and mix them together. For silage, sample across the face. For grain, use a probe at several spots.

Keep the sample cool and dry, put it in a clean bag or container, and send it quickly. Label it clearly. Ask the lab for its sampling instructions, since they differ for whole kernel, forage and mixed ration.

Know the toxins

Common mycotoxins in dairy feed include aflatoxin, deoxynivalenol (also called DON or vomitoxin), zearalenone, fumonisin and T-2 toxin, among others. Which ones are likely depends on the crop, the weather and where it was stored. Aflatoxin is a concern in warm, dry-stressed regions and can pass into milk as aflatoxin M1, which is regulated. Check with your milk buyer and state regulators about the rules that apply to you. Federal action levels exist, and you should check current FDA guidance rather than rely on memory.

Test methods

Labs use several methods:

Ask the lab which method it uses, what toxins are covered, and how it reports results, in parts per billion or parts per million, on dry matter or as-fed.

Use more than a test

Mycotoxin effects in cows are often vague: off feed, lower milk, poor fertility, loose manure, higher somatic cell counts and so on. A test result should be combined with a look at feed quality, cow performance and your vet's view. Several toxins at low levels can add up even if each is under a guideline.

If you've got a moldy feed and a lab report that comes back clean, don't relax right away. The sample may have missed the hot spot.

What to do with a positive

Talk to your nutritionist and vet. Options include diluting, discarding the worst feed, and in some cases using a binder, though binders vary in effect by toxin, so ask what the evidence supports for your case. Don't feed contaminated feed to young or pregnant animals.

Testing checklist

  1. Pull many subsamples from across the lot.
  2. Mix, then send a labeled portion fast.
  3. Choose the lab and method that fit your suspected toxins.
  4. Ask for results in the units you need.
  5. Review with your nutritionist and vet.
  6. Keep records for each feed lot.

For more, see Iowa State's Ag Decision Maker, Extension.org and Penn State Extension. The American Association of Bovine Practitioners can help you find a vet who handles feed-related herd problems.

If your cows act sick and your feed looks suspicious, test early. Waiting for certainty usually costs more than the test does.