How do I design a freestall barn?

Start with cows, not blueprints

ELKHORN, Wisconsin — A good freestall barn is designed around cow behavior: resting, eating, drinking, walking and being milked, all without crowding or stress. Set the herd size and growth plan, then work from the stalls outward. A good design gets pricey mistakes out of the way before concrete is poured. Hire someone who has built a number of barns, and visit some.

Decide the basics first

Fix the herd size you'll house now and later. Planning for some expansion is cheaper than adding on awkwardly. Pick the number of cow groups, the milking system and the site: drainage, prevailing wind, access for feed and manure equipment, and space for future growth.

Check the site with the Web Soil Survey and talk to your county zoning office, state environmental agency and NRCS about setbacks, manure storage rules and permits, which vary by place and herd size.

Stalls and resting area

Stalls should match the cows' body size, with proper length, width, neck rail and brisket locator positions. Cows need room to lunge forward when rising. Extension agricultural engineers can provide current dimension guidelines; don't rely on old plans.

Choose a stall surface early, because bedding type influences stall base design, cost and labor. A common rule is one stall per cow with some groups understocked, especially fresh cows. Overcrowding cuts lying time and increases lameness.

Feeding, water and alleys

Give enough bunk space and wide alleys so cows can pass behind eating animals. Place waterers where cows can drink easily on the way in and out of the parlor and at crossovers. Alley width, crossovers and dead ends affect cow flow and the chance of slip injuries.

Choose flooring that gives traction while protecting hooves. Grooved concrete, rubber and other surfaces each have tradeoffs, and cows' feet will tell you whether you've got it right. Ask the builder to show similar barns that have been in use for a few years.

Ventilation and lighting

Cows tolerate cold better than heat, so design for airflow. Naturally ventilated barns rely on sidewall openings, roof pitch and ridge openings; tunnel or cross ventilation is another option. Provide shade, fans and soakers where heat is a problem. Good light helps cows and the people working with them.

Get ventilation design from an engineer experienced in dairy barns. A tight barn with poor air looks great until the first humid week.

Manure, cost and safety

Plan for manure handling: scraper, flush or other systems, storage and field application. This often decides the barn's layout. Consider safety, too: manure gas, equipment and animal handling. See OSHA agriculture and NIOSH agriculture for safety information.

Cost out the whole project including site work, utilities, manure storage and equipment. Ask NRCS and your lender about conservation programs and financing, but confirm eligibility directly; programs and funding change.

Check your design before building

Walk through the plan with your vet, nutritionist, milking crew and equipment dealer. Ask each: where will this get in the way? Visit working barns and ask owners what they'd change. Compare at least a few bids and ask each builder for references.

Take your time. A barn is a 30-year decision made in a few months. Moving a wall on paper costs a pencil eraser. Moving it later costs a lot more.