How do I design a goat milking parlor?

Start with flow, floor and cleanup

LANCASTER, Wisconsin — A good goat milking parlor starts with how animals and people move through it, then adds a milking platform, a clean milk room, a floor that drains and a wash area, in that order. Designing around flow and cleanup keeps labor down and milk quality up. Here's how to think through the layout before you pour concrete or order stalls, with advice to check any plan with your state dairy regulator first.

Define your herd size and growth

The parlor should fit the herd you expect in a few years, not only the one you have now. Count the does you milk today, estimate where you'll be in three to five years, and decide how many you want to milk at once. A common approach is to pick a platform size that lets you milk the herd in a reasonable block of time, since long milking sessions tire you and the animals.

Think about how animals will arrive. A holding area next to the parlor, large enough to hold the group that will be milked next, keeps the line moving. Crowded holding pens cause bullying and dirty udders, so give animals space and a place to wait that's clean and shaded.

Choose a platform layout

Goat parlors are typically raised platforms where animals stand in a stall at a height that puts the udder within reach. Common layouts include a single line, called a side-opening, and a double line where animals face out or in. A walk-through setup, with animals entering at one end and leaving at the other, keeps traffic flowing in one direction.

A rotary system is possible for large herds, but most farms use a straight line. Stall width, platform height and gate design should suit your animals. Talk with other goat dairies, visit a few, and watch where they save steps. Extension programs and the Cornell small farms program are good places to ask for contacts. Equipment dealers can also supply plans, though keep in mind that they want to sell you what they carry.

Plan the floor, drainage and lighting

Flooring needs to be non-slip, sealed and sloped to drain. Concrete with a broom finish is common. Slope the floor so wash water leaves the area and doesn't pool near the animals. Install floor drains with covers that you can clean and that keep rodents out.

Light the parlor well, so you can see udder condition and cleanliness, and ventilate it so humidity doesn't build up. Wall surfaces should be smooth, sealed and washable. Don't forget the manure and wash water path: where does it go after it leaves the building? Ask your state agency or NRCS about waste handling requirements for a milking operation, because parlor wash water is a regulated waste stream in many places.

Separate the milk room

The milk room should be separate from the animal area, with a door that closes, a washable floor, a hand sink, hot water, a cooling tank or other cooling system and storage for equipment. Keep it clean and free of feed, chemicals and pests. State dairy rules often spell out these requirements, including the number of sinks, lighting levels and the distance from animal areas.

Place the milk room so you can carry or pipe milk to it without passing through dirty areas. Think about delivery access for a milk truck or for customers picking up product, so strangers don't walk through animal spaces. Also plan for a place to keep records and a spot for testing supplies.

Put people first

A parlor that's hard on the milker doesn't last. Think about the height of the platform, the reach to the animals, the walking distance between the udder and the equipment, and how you'll handle a sick or kicking doe. Rubber mats, good lighting and a place to sit and rest make a difference.

Add safe gates and exits, since goats find any weakness. Rounded corners keep animals from piling up. Include a way to move a doe out without stopping the line. Hot water, a clean storage place and easy access to a first aid kit are small things that make a big difference. For general farm safety, the OSHA agriculture page is worth a read.

Check plans before building

Before construction, send your drawing to your state dairy regulator and ask for plan review. This step prevents expensive changes later. Ask also about local permits, zoning and wastewater rules. Get at least two quotes if you hire a contractor, and ask a dairy equipment technician to review the plan for vacuum line placement and wash system needs.

A Beginning Farmers resource or a beginning farmer loan may help with financing. Build it for the work you'll do every day, twice a day, for years. A parlor you like using is one you'll keep clean.