How do I integrate manure into crop planning?

Treat manure as a planned input

LINCOLN, Nebraska — You integrate manure into crop planning by treating it as a fertilizer source with a known analysis, a known place in the rotation and a known application window, instead of as something to get rid of when the pit is full. That means sampling it, deciding which fields get it, matching the rate to the crop's needs, and adjusting the purchased fertilizer after. It sounds like extra work, and it is, but the payoff shows up in fertilizer bills and in fewer surprises at the end of the season.

Start with a manure analysis

Everything downstream depends on knowing what's in the material. Sample each storage, or each source if you have more than one species, and send it to a lab that does manure analysis. You want total nitrogen, ammonium nitrogen, phosphorus, potassium and dry matter at a minimum. Many labs also report organic matter and some micronutrients.

Take samples close to when you spread, because storage changes things. A sample drawn from a pit before agitation tells you little. Agitate, then collect from several points or loads and mix them. Repeat each year, since feed rations and water use change, and keep the results in the same folder as your field records. Your state extension service or the Nutrient Stewardship program can help you find a reputable lab and read the report.

Map manure to fields and crops

Not every field should get manure. Start with a list of fields, then rank them. Fields with low soil test phosphorus and potassium go first, because they need the nutrients. Fields near streams, wells, sinkholes or neighbors may be off limits or limited by setbacks. Check the Web Soil Survey for slope, drainage class and flooding risk, and keep high-risk soils at the bottom of the list.

Then match the field to the crop that follows. Corn takes up a lot of nitrogen and often earns the manure. Small grains, hay and cover crops can use it too, with different timing. Soybeans don't need much nitrogen, so manure there is usually a phosphorus and potassium play. A rotation sketch for three or four years, with manure marked where it fits, keeps you from hauling to the same close fields every year because they're convenient.

Set the rate on the limiting nutrient

Here's where plans go wrong. Manure comes with nitrogen, phosphorus and potassium in a ratio that rarely matches the crop's needs. If you apply to meet the nitrogen need, you'll often overshoot phosphorus. Over several years that builds soil test phosphorus, and in some states it triggers a restriction on further application.

Many state programs and conservation plans use a phosphorus-based or phosphorus-index approach on fields with high soil test levels. Ask your extension office or NRCS planner which rule applies to you. Then work the numbers: the crop's recommended nitrogen, minus credits for soybeans or legumes before it, minus the plant-available nitrogen in the manure at your planned rate. Whatever's left is what you buy, if anything. The NRCS conservation programs page is a reasonable place to start asking about a nutrient management plan and possible cost-share.

Plan timing and method

The same manure behaves differently depending on when and how it goes on. Injection or quick incorporation holds more ammonium nitrogen than surface broadcasting on a warm, windy day. Spring application ahead of a nitrogen-hungry crop loses less than fall application on soils that stay wet or drain fast. Fall application can fit a labor schedule, but check your state's rules on frozen and snow-covered ground, and think about the nitrogen that could leach before the crop needs it.

Build a calendar: which storages empty when, which fields are open after harvest, and which equipment you have. Include a plan B for a wet spring. Having a second field on the list that can take manure when the first is too soft means you won't be tempted to spread into mud.

Keep records and adjust

After application, write down the date, field, rate, method, weather and the analysis you used. Then check what happened: yield, a late-season stalk nitrate test on corn if your extension service recommends it, and a soil test every few years. If you got lower nitrogen response than expected, adjust the availability assumptions next season.

You may find manure covers more of your fertilizer need than you thought on the fields closest to the barn, and less on the far ones where the haul costs more than the fertilizer is worth. That's a useful thing to learn on paper. A certified crop adviser can help with the math, and you can find one through the Certified Crop Adviser program. Done once, the process becomes routine, and a pit that used to be a problem turns into a line item you can plan around.