How do I maintain a milking parlor floor?

Keep it safe, clean and sound

SHEBOYGAN, Wisconsin — A milking parlor floor needs three things done on a schedule: daily cleaning, regular checks for wear and cracks, and attention to traction. Wet concrete, manure, milk and detergent all end up on that surface a few times a day, and cows and people both have to walk on it. A good floor keeps cows on their feet and keeps your crew out of the doctor's office.

What you do depends on your floor material, your parlor type and your wash system. The general principles are the same on most dairies.

Clean on a set routine

Wash the floor after every milking. Remove manure and bedding solids first with a scraper or squeegee, then rinse. Hosing alone pushes slurry around without taking it away. If your parlor has a flush system, check that it covers the whole area, including the corners where solids pile up. Follow your milk-quality advisor's guidance on whether you need sanitizer or detergent on the floor and how much water to use.

Pay attention to the area around the pit, the cow standing areas, the holding pen exit and the walkway. Those spots take the heaviest traffic and collect the most mess. Once a week, scrub with a stiff brush where residue builds up, since slick film is a hazard even when the floor looks clean.

Inspect for cracks, wear and drainage

Walk the floor with a flashlight and a notebook on a regular schedule. Look for cracks, spalling, exposed aggregate, loose or missing expansion-joint filler, and low spots where water pools. Standing water means slip risk, and it also means a wet place for bacteria to live. Check floor drains, grates and gutters. A drain blocked with bedding will back up and flood the parlor at the worst time.

Mark problem spots with paint and log them. Small cracks are cheap to repair. Large ones that were ignored for a year can mean pulling up and re-pouring concrete, which costs real money and means a parlor out of service.

Keep traction in a safe range

A floor should have enough texture for hooves to grip without being so rough it wears soles and knees. Slick floors lead to slips and falls. Overly abrasive floors can cause sole wear and lameness. The right texture depends on your cows, your concrete and how much wear it gets. Ask your hoof trimmer and your extension dairy specialist what they see in your herd. Lameness patterns tell you a lot.

If the floor has grooves, keep them clean and reopen them as they wear down. Rubber mats in standing areas may help comfort and traction, but they have to be cleaned under and around or they become a trap for muck. Talk with the installer about maintenance before you buy.

Protect your workers

People slip in parlors more than anyone likes to admit. Provide non-slip, waterproof footwear and keep hoses coiled and out of walkways. Mark steps and level changes clearly. Provide good lighting and fix burned-out fixtures. OSHA's agriculture page and NIOSH agriculture resources cover general safety topics that apply, and your insurance carrier can often run a free walk-through.

Teach new hires how to walk in the pit and around cows, and to speak up when they see a hazard. A quick report at morning briefing prevents a lot of trouble.

Plan repairs and resurfacing

Even good floors wear out. Keep a running file with photos, repair dates and costs. When the cost of patching starts to rival a resurfacing job, it's time to get quotes. Ask contractors about surface treatments, curing time, and how long your parlor would be out of use. Plan for where cows will be milked during the job. If your lender or farm program can help with building projects, check farmers.gov loans and ask your local lender.

Resurfacing is much easier when you do it on your schedule, not when a cow has gone down. Cows will tell you when the floor is failing, though they tell you with their feet and not with their words.

Finally, write the plan down: who cleans, who inspects, who calls the contractor. A floor that belongs to everyone belongs to nobody.