How do I make manchego from sheep milk?
A pressed, aged sheep cheese
CARBONDALE, Colorado — Manchego-style cheese is a pressed, semi-firm cheese made from sheep milk: you heat the milk, add culture and rennet, cut the curd small, cook it, press it in a mold, brine it, and age it for a few months. True Manchego is a protected name tied to a region of Spain, so American makers call theirs manchego-style. It needs more equipment and patience than fresh cheese, a cheese press, a mold, a place to age, and months before you can taste your work. This article walks through the process and the things worth planning before you start.
Plan space, gear and milk
You need a stainless steel vat or pot with a water bath, a thermometer, a long curd knife, a mold, a press with a way to apply increasing weight, cheesecloth, a brining container, and an aging space held cool and humid. A wine fridge or a dedicated cheese cave works for small batches. Sheep milk yields a lot of cheese per gallon, but it is scarce, so most makers need many gallons saved up, often by freezing during peak lactation.
Use clean milk and sanitize everything. Raw milk cheese aged beyond the federal minimum may be legal to sell in some places, but pasteurized milk is the more common path for beginners and the safer one.
Make the curd
- Warm the milk gently and add a mesophilic and thermophilic culture blend, then let it ripen.
- Add rennet and let the curd set until it breaks cleanly.
- Cut the curd small, about the size of rice or small peas, since a dry cheese needs smaller curd.
- Heat slowly while stirring, raising the temperature of the curd so it firms and releases whey.
- Let the curd settle, then drain most of the whey.
Heating too fast toughens the outside of the curd and traps moisture. Slow, even warming gives better texture.
Mold and press
Pack the curds into a cloth-lined mold and press with light weight first, then increase it over several hours, flipping and re-dressing the cheese in fresh cloth. The goal is a smooth, closed surface with no gaps, since gaps invite bad mold. A properly pressed wheel feels firm and holds its shape.
Many traditional versions have a distinctive patterned rind from molds or presses; this is cosmetic, and you can do without it.
Brine and dry
After pressing, soak the wheel in saturated brine for a number of hours depending on weight, then pat dry and rest on a clean surface at cool room temperature until the rind is dry. Keep the wheels apart and flip them daily so they dry evenly.
Age with care
Move wheels to the aging space at cool temperatures and high humidity. Turn them regularly and wipe off unwanted mold with a cloth dampened in light brine. Some makers rub the rind with olive oil to protect it. Age for at least a couple of months for a young cheese and longer for a firmer, nuttier one.
Keep a log of each wheel with make date, weight and tasting notes. Tasting at intervals teaches you far more than a recipe does.
Know the rules and find help
Selling aged cheese means a licensed facility in most states, and raw milk aged cheese may carry added requirements. Ask your state agriculture department before you sell. The Sheep Industry Association can connect you with dairy sheep producers, the Agricultural Marketing Resource Center covers value-added dairy, and ATTRA provides small ruminant guidance. A hands-on workshop through eXtension resources can save you a few ruined wheels.
Expect your first few wheels to be educational. A cheese cave is mostly patience in a cold box, and the ewes did the hard part.