How do I make parmesan at home?
Parmesan-style takes patience
PARMA, Ohio — You can make a Parmesan-style cheese at home, but it takes time, good milk and a press. The true name Parmigiano Reggiano belongs to cheese made in a specific region of Italy under strict rules, so home versions are best called Parmesan-style. The basic method uses part-skim milk, a thermophilic culture and rennet. The curd is cut very small, cooked to a high temperature, pressed firmly, brined and aged for many months. Here's how it works, what to expect and where home makers usually trip up.
Milk and culture
Parmesan-style cheese traditionally uses partly skimmed milk from a mix of evening and morning milkings. Home makers often blend whole and skim milk to get close. Fresh milk gives the best results. Avoid ultra-pasteurized milk, which may not set properly, and if you use store milk, add calcium chloride as the recipe directs.
A thermophilic culture, rennet and calcium chloride for store milk are standard. Follow supplier instructions, because amounts vary with the cheese and culture. Because the wheel will age for months, start with clean milk and clean equipment. Small mistakes at the vat are easy to taste a year later.
Cut and cook
Once the curd sets firmly, cut it to very small pieces, about the size of rice grains. Then cook slowly, raising the temperature gradually to the low 130s degrees F, or whatever your recipe specifies, while stirring. The curd becomes small, firm granules that sink in the whey.
Hold at that temperature until curd is dry and springy. Cooking time may be about an hour or more. Test a handful by squeezing. It should fall apart when released rather than clump. If it stays soft and sticky, keep cooking at temperature a little longer.
Press firmly
Gather the curd in cloth and move it to a mold. Parmesan-style cheese needs heavy pressing, increasing weight over many hours and flipping the cheese regularly. Follow the pressing schedule in your recipe, since too much pressure at the start can seal the surface and trap whey.
A well-pressed wheel feels firm and smooth, with a closed surface. If you see gaps or holes, the curd may have been too dry or the press too light at first. Keep the wheel at a steady cool room temperature while pressing. Home-scale wheels are usually small, since a full-size wheel would need a great deal of milk and a heavy press.
Brine and age
After pressing, wheels are salted in a brine bath for days, depending on size, then dried. Aging takes place in a cool space, often around 50 to 55 degrees F, with humidity that keeps the rind from cracking. Turn and wipe wheels regularly with a cloth, and rub them with a little oil if the surface dries.
Home-aged Parmesan-style cheese reaches a decent flavor after several months, but long aging gives the most flavor and the granular texture people expect. Many makers age ten months or longer. Taste a small plug with a cheese trier now and then, and write down what you find.
Rules and resources
Raw milk cheeses must meet federal aging requirements before sale, so check with your state regulator and FDA. Home production for your own use is different, but safe milk handling still matters. Don't label a home product Parmigiano Reggiano. Parmesan-style or hard Italian-style cheese is the honest description.
Learn more from Penn State Extension, eXtension, Cornell Small Farms and AgMRC. Your state Extension dairy specialist can also point you to a nearby licensed maker who may be willing to talk shop.
A few practical numbers help with planning. Hard cheeses of this type use roughly ten pounds of milk for each pound of finished cheese, so even a modest wheel takes several gallons. Plan your press, brine tub and aging space before you start, since a heavy wheel is awkward to move once it's in the brine. Keep sample plugs, labeled by make date, so you can follow the flavor change over many months and know when yours is ready.
Good Parmesan rewards patience. If you're impatient, buy a wedge and make ricotta.