How do I manage biogas from manure?
Capture it, use it, or flare it
TWIN FALLS, Idaho — Biogas from manure is mostly methane and carbon dioxide, with traces of hydrogen sulfide and water vapor. It burns, it corrodes, and in the wrong place it can asphyxiate or explode. Managing it well means handling it as a fuel with safety rules, not as an exhaust you hope goes away.
Know what's in the gas
Methane gives biogas its energy. Carbon dioxide dilutes it. Hydrogen sulfide is the nasty one: it smells like rotten eggs at low levels, dulls your sense of smell at higher ones, and corrodes engines, boilers and piping. Moisture condenses in lines and causes more trouble than most people expect. Before you pick any end use, get the gas composition measured over time, not once.
Choose an end use before you build
Common options are:
- Heat: burn it in a boiler to warm digesters, barns or water. Simple, but heat demand drops in summer.
- Electricity: run it through an engine-generator. Requires interconnection with your utility and gas cleanup.
- Upgraded fuel: clean it to pipeline-quality or vehicle fuel. Higher capital cost and more rules.
- Flaring: burn it to destroy methane when you can't use it. Every system needs one for upset conditions.
Matching supply to demand is what separates a good project from an expensive one. Ask what you'd do with gas in the months when nothing needs the heat.
Treat the gas properly
Most systems need some cleanup. Condensate traps and drains handle water. Hydrogen sulfide removal can be biological, chemical or through iron media, and each has operating costs. Skipping it shortens engine life. Ask the vendor how often media or chemicals have to be replaced and what that costs per year, and ask former customers whether those numbers held.
Safety first, every time
Biogas piping, gas holders, digester headspace and manure pits are hazardous. Hydrogen sulfide can drop a person in seconds at high concentrations. Rules to set in writing:
- No one enters a tank, pit or covered structure without a permit and a gas monitor.
- Install fixed gas detectors where gas could collect.
- Keep ignition sources away from piping and vents.
- Train everyone on rescue procedures; never send a second person in to rescue the first.
See OSHA's agriculture page and the NIOSH agriculture program for confined-space guidance, and the AgriSafe network for training.
Permits, records and help
Air permits, utility interconnection and fuel-use rules vary by state and by end use. Ask your state environmental agency early. Keep records of gas production, runtime of the engine or flare, maintenance and any alarms. Records help you troubleshoot and make permit conversations easier.
For technical and funding information, start with NRCS and USDA Rural Development programs through farmers.gov. I won't quote program availability, so check the current offerings. The US Dairy industry site also posts sustainability resources.
Treat the system like a small power plant that happens to live next to the freestalls. Keep a maintenance calendar, budget for parts, and don't skip the gas-line walkaround because it's cold. The cows won't help you troubleshoot.