How do I manage dairy manure effectively?

Treat it as a crop input

MADISON, Wisconsin — Managing dairy manure well comes down to one idea: it is a fertilizer you produce every day, whether you want it or not, and the job is to store it safely, know what is in it, and put it where a crop can use it. Farms that do this stop paying for nutrients twice, once in the feed bill and again in the fertilizer bill. Farms that don't end up with lagoons at the brim and neighbors with strong opinions.

Effective management is a loop, not a single task. You collect, store, sample, plan, apply, and record, then use the records to adjust the next round. The sections below walk through each piece in the order you would actually do it.

Know how much you produce

You can't manage a volume you've never measured. Start with the animals: lactating cows, dry cows, heifers and calves all produce different amounts, and your extension office or NRCS planner can supply standard production tables for each class. Then add everything that goes into the pit along with the manure: parlor wash water, bedding, milkhouse waste, and rain that falls on open lots or storage surfaces. Many farms are surprised that water ends up being the biggest share of what they haul.

Write the total down as gallons or tons per year and per day. That number drives storage size, hauling time and the acres you need.

Store it so you control timing

Storage is what lets you apply when the crop and the weather want it, not when the pit is full. A farm with too little storage spreads on frozen ground, wet ground, or whatever field happens to be dry, and that is where most problems start. Check how many days of storage you actually have and compare it to the longest stretch you can't spread. If the answer is uncomfortably small, fix that before anything else. The NRCS can explain design standards and cost-share options for storage.

Test the manure, test the soil

Book values are a starting point only. Feed, bedding and water use change what's in your manure, so a lab analysis on your own samples beats any table. Pair that with recent soil tests so you know which fields need phosphorus and potassium and which are already loaded. Fields that test high in phosphorus should get less manure or none, and that's where a plan matters. The Manure Management resources at nmconline.org and extension.org are good places to see how labs report results.

Match the load to the field

Once you have tests, assign manure to fields by crop need. Corn, grass hay and small grains take up different amounts. Fields close to the barn tend to get the most manure because hauling is easy, and they tend to build up phosphorus for the same reason. Rotate which fields get the heavy loads, and send some to the far acres even when it costs diesel. Leave buffers along streams, ditches, wells and tile intakes, and follow your state rules on setbacks.

Keep records and adjust

Record the date, field, rate, method, weather, and who ran the spreader. Keep storage levels too. These records are what an inspector or a lender wants to see, and they are how you spot that field twelve keeps getting too much. A simple notebook in the truck works. So does a spreadsheet.

If you have a nutrient management plan, review it every year and after any herd size change. If you don't have one, the next article in this series on writing one is the logical step. Local conservation district staff and your extension dairy agent can usually walk through the first draft with you, and the farmers.gov conservation page lists what's available through USDA.

Start with the least glamorous step. Measure what you make, then everything else gets easier.