How do I manage lagoon levels?

Keep storage, not surprises

MADISON, Wisconsin — Managing a manure lagoon comes down to one habit: knowing where the liquid sits today, where it needs to be before the next wet stretch or freeze, and when you can legally and agronomically empty it. Most lagoon trouble isn't a mystery failure. It's a lagoon that was allowed to creep up through fall, hit winter with no room, and then got a bad spring rain on top. Level management is bookkeeping plus a staff gauge and a little discipline.

Install and read a marker you can trust

If your lagoon doesn't have a permanent depth marker, put one in. A painted post or staff gauge set where you can read it from the bank works. It should show the maximum operating level and the start-pumping level your design or plan calls for, plus the freeboard line you never want to cross. Your design documents, or your NRCS or state engineer, can tell you those numbers for your structure. Don't guess them from memory.

Read it on a schedule. Weekly is reasonable, and after any heavy rain, read it the same day. Write the reading in a log with the date, and note recent rainfall. Over a season that log tells you your real inflow rate, which is more useful than any estimate on paper.

Know what actually fills the lagoon

Manure and parlor water are only part of it. Rain falling directly on the surface, runoff from lots or roofs that drains into it, milking center wastewater, and bedding or feed leachate all add up. A lagoon with a large drainage area can gain more from one storm than from a month of cows. Walk the drainage path and ask whether clean roof water or upslope runoff can be diverted away. Every inch of clean water you keep out is an inch of storage you keep.

Evaporation helps in summer and does nothing in winter, so a level that looks comfortable in late summer can be misleading.

Set a pumping calendar, not a pumping emergency

Plan two drawdowns around cropping and weather. A common pattern is to bring the level down after harvest, once fields are clear and soils can take it, and again in spring before planting. Your state sets the windows, application rates and any frozen-ground limits, so check with your state agriculture or environmental agency and your extension office.

Before pumping, you need nutrient numbers. Sample the lagoon liquid and have it analyzed so you know what you're applying. Our guide to nutrient stewardship resources can help you match rates to crop need.

Watch the structure while you watch the level

Sudden level drops with no pumping can mean a leak. Wet spots on the outside berm, new seeps, cattails in a strip that used to be dry, and burrowing animals all deserve a look. Keep woody growth off the berms because roots open pathways, and mow so you can actually see the slope. Check the inlet and outlet pipes after every pumping season.

Make a plan for the bad year

Ask yourself what you'd do if the lagoon reached the freeboard line during a wet spring. Know ahead of time who your custom applicator is, what permit or notification your state requires for emergency land application, and which fields can take it. Calling the state agency before the crisis is cheaper than calling after.

Resources worth bookmarking: the NRCS conservation practice standards for waste storage facilities, the Wisconsin extension farm resources, and the National Milk Producers-affiliated environmental programs for industry guidance. For cost-share on repairs or a bigger structure, the farmers.gov conservation page points you to your local service center.

A lagoon doesn't care about your schedule. Read the gauge, log the numbers, and pump while the weather still gives you a choice.