How do I milk a goat efficiently?

Routine, prep and a clean finish

WOOSTER, Ohio — You milk a goat efficiently by being consistent: same time, same order, same routine, with a calm doe on a stand, a quick udder prep, a thorough but unhurried milk-out, and a finish that includes teat dipping and cleanup. Speed comes from routine, not from rushing. A doe that's relaxed lets her milk down faster and more completely, and a milker who works the same way every time spends less effort. Here's a practical sequence for hand or machine milking.

Set up the stand and the doe

A milking stand raises the doe to a comfortable height, restrains her, and holds a feed pan. Grain or pellets in the pan keep her occupied and standing still. Train a young doe by putting her on the stand and feeding her there for several days before you touch her udder. Patience early saves a lot of kicking later.

Keep the area clean, with a washable surface and good light. Trim long belly hair and the hair around the udder, since it holds dirt and falls into the pail. Wear clean clothes, wash your hands, and tie your own hair back. Sound simple? It is. Skipping it is the most common reason for off-flavored or high-bacteria milk.

Prep the udder

Prep takes under a minute per doe. Start by checking the teats and udder for heat, swelling or lumps. Strip a few squirts from each teat into a strip cup or onto a dark surface, watching for clots, flakes or watery milk. That's your first sign of mastitis. Don't strip onto the floor where other goats walk.

Wipe each teat with a single-use towel and sanitizer, or use a pre-dip and wipe it off after the manufacturer's contact time. Dry the teats well. Wet teats pull dirt and bacteria into the milk, and they also slip when you try to squeeze. Many dairies also use the prep as stimulation, since the touch triggers milk letdown.

Milk it out

For hand milking, close your thumb and forefinger at the top of the teat to trap the milk, then squeeze with the remaining fingers in sequence from top to bottom. Release, let the teat fill, and repeat. Keep a steady rhythm and use both hands alternately. Good technique saves your hands. Gripping hard and yanking wears you out and can irritate the doe.

For machine milking, attach the cluster gently, and avoid air leaks by pinching the line when you attach. Watch the udder. When milk flow slows, remove the cluster by shutting off the vacuum first, so you don't pull on the teats. Leaving the unit on an empty udder is a common cause of teat damage. Stripping out the last bit by hand, if you do it, should be brief.

Complete milk-out matters. Milk left behind can contribute to mastitis and, over time, to lower production. Gentle udder massage near the end can help the last milk descend.

Finish and clean up

Dip each teat in a labeled post-milking teat dip, covering at least half the teat, right after milking. The teat opening stays open for a short time after milking, so dip fast and keep the does standing or give them fresh feed so they don't lie down in the dirt right away.

Strain and cool the milk quickly, keep it chilled, and wash everything that touched it. Rinse, wash with warm water and a dairy-approved detergent, then sanitize and let it air-dry. Buckets, strainers, lines and cluster liners all need a routine, with the milking machine's manufacturer instructions in hand. Replace liners on the schedule the maker gives.

Build a rhythm and track results

Milk at regular intervals, ideally evenly spaced twice a day. Uneven intervals tend to lower production and raise udder pressure. Milk the same does in the same order, with first fresheners earlier, so they learn the routine, and mastitis-positive does last, to avoid spreading infection.

Keep a notebook or app with each doe's milk weight, health notes and dates. Dairy herd improvement programs used in many states, along with Extension.org resources, can help you understand testing options, and your veterinarian can help with mastitis questions. A Cornell small farms program resource may help if you're setting up a small commercial dairy. Efficient milking is mostly boring, and the boring ones usually have the cleanest bulk tank.