How do I prepare for a processor inspection?

Walking in ready when the inspector shows up

SIOUX FALLS, South Dakota — The best inspection prep happens months before the inspector pulls into the lot. Inspectors for dairy plants are looking for the same things whether they call ahead or not: clean equipment, controlled temperatures, accurate records and staff who know what they are doing. If you run your plant every day as though someone were watching, an inspection is a Tuesday. Here is how to get there.

Know what the inspector will check

Your state dairy regulator or whichever agency licenses you will have a checklist. Ask for a copy. Many dairy inspections follow standards drawn from the Pasteurized Milk Ordinance for Grade A products, and cheese or manufactured product plants follow other state and federal rules. The checklist usually covers building condition, water supply, equipment sanitation, pasteurization controls, product storage temperatures, pest control, employee hygiene and records. Go through your own plant with that list in hand and mark every item you would not want to explain.

Do a self-inspection on a schedule

Walk the plant weekly with a written form. Look at floors, drains, ceilings, door seals, gaskets, hoses and anywhere product or moisture collects. Check the hand wash sinks for soap, towels and hot water. Test sanitizer concentrations. Check that pest traps are in place and logged. Write down every problem you find and the fix. A log full of found-and-fixed problems looks better to an inspector than a log with nothing in it, which looks like nobody is looking. Rotate who does the walk so fresh eyes catch things.

Organize your records

Inspectors often ask to see temperature charts, pasteurizer records, cleaning logs, calibration records, supplier information, training sign-in sheets and complaint files. Keep them in one place, labeled by date, and make sure the person on shift knows where they are. If a record is missing, do not backfill it. Write a note explaining the gap and what you changed to prevent it. Forged paperwork is a far bigger problem than missing paperwork. If your plant falls under federal food safety rules, your written food safety plan should be current and signed.

Prepare your people

Everyone should know who deals with the inspector and what to do if that person is out. Staff should answer questions honestly and briefly, and not guess. If they do not know, they should say so and find someone who does. Remind them of basics: clean outer clothing, hair restraints, hand washing, no jewelry where prohibited. Offer the inspector the same protective gear your employees wear. Be courteous. You are not required to enjoy it, but the inspector's report is part of your permanent file.

Handle findings the right way

If the inspector notes a violation, ask questions until you understand exactly what was found and what the standard requires. Do not argue in the moment. Write down the finding, the deadline and your corrective plan, then do it and document it. Send the follow-up if the agency asks for one. Use the report as a free consultation: it lists the weak points in your plant. The USDA Agricultural Marketing Service and your state extension service can help with training, and the OSHA agriculture page covers workplace safety, which may come up on the same walk-through.