How do I reduce wastewater volume?
Every gallon you skip is storage you keep
CHINO, California — The simplest way to handle less wastewater is to produce less of it. On a dairy, much of the wastewater volume comes from habits and equipment rather than necessity. A water audit over a week or two usually finds savings that cost little and pay back quickly in smaller storage needs, lower pumping hours and fewer fields to spread on.
Audit the water first
Put a meter on the supply line to the milking center and, if you can, on the barn flush system. Record gallons per day for a typical week. Then list every use: pre-wash, parlor wash-down, pipeline cleaning, bulk tank wash, plate cooler, alley flush, hoof bath and hose use. Seeing the numbers tells you where to start. If you can't meter, time the hoses and count flow rates.
Reuse before you discharge
Plate cooler water is clean but warm, and many farms reuse it for stock water or for the first rinse in the parlor. Pipeline rinse water, if it's not heavy with chemicals, may be usable for flushing alleys. Check with your milk buyer and your regulator before reusing anything that touched milk contact surfaces or chemicals.
Fix the hose habit
Hoses left running are the biggest culprits. Install trigger nozzles, use pressure washers sized to the job, and scrape or sweep manure before washing. A pre-scrape of the parlor floor cuts rinse volume noticeably. Fix leaking valves, float controls and troughs.
Separate clean from dirty
Roof gutters and downspouts should go to clean outlets, not into the lot or lagoon. Divert upslope runoff with berms or ditches. Cover feed storage so rain doesn't become leachate. These are about water you don't control, and they often account for more volume than the cows do. Your NRCS office can help with roof runoff structures and diversion design through farmers.gov conservation.
Improve solids handling
A solids separator can let you recycle water for flush systems, reducing fresh water use and sending less to storage. Recycled flush water needs good solids separation to keep pumps and nozzles from clogging. Sand-laden systems need sand lanes. Costs and performance vary a lot, so talk to farms that have run a system for years.
Check chemical use
Overdosing detergents doesn't clean better, and it adds to the wastewater's chemical load. Review wash programs with your dairy supplier. Following label rates also protects soils when the water gets applied.
Count the savings
Smaller wastewater volume means:
- Less storage needed, or longer time between pumpouts.
- Lower pumping and application costs.
- Lower risk of overflow in wet weather.
- Reduced water and energy bills.
Check with NRCS about water conservation practices, and see the National Milk Producers Federation and US Dairy for industry water-use resources. In dry regions, drought.gov tracks water conditions that may affect your supply.
Start with the cheapest fix, the hose nozzle, and work toward the expensive ones. The aim is a lower number on the meter and a lagoon that doesn't climb by the week.