How do I sample manure correctly?
Collect many subsamples, mix, and ship cold
TULARE, California — To sample manure correctly, collect several subsamples from different spots and depths, mix them well in a clean bucket, fill the lab's container with a representative portion, keep the sample cool, and ship it quickly with a clear label. The method differs for liquid, solid and composted manure, and the goal is always the same: a small sample that stands in for a very large, uneven pile.
Safety comes first. Never climb into a manure pit or tank, and don't lean over an open storage with the agitator running. Gas can kill in minutes.
Get your gear ready
You need a clean plastic bucket, a long-handled dipper or sampling probe for liquid manure, a shovel or manure fork for solid manure, gloves, boots, eye protection, the lab's sample bottles or heavy-duty zip bags, a permanent marker, and a cooler with ice packs. Avoid metal containers for samples, and don't rinse containers with soap, since residue can contaminate results.
Ask your lab what it wants. Some provide bottles and shipping instructions. Ask whether to freeze samples, how much volume is needed, and what forms to complete. Check shipping days so a sample doesn't sit in a warm warehouse over a weekend.
Nutrient Stewardship and your extension office offer sampling guidance, and the CDC NIOSH agriculture pages cover gas safety around manure storage.
Sampling liquid manure
Liquid manure separates. Solids settle and a crust may form. Agitate before sampling, following the safety rules for your system, and keep the agitation going or sample soon after. Agitation releases dangerous gases, so keep people and animals out of nearby buildings and ventilate.
Collect subsamples while pumping or loading out, from the pump outlet or the tank discharge at several times during the load, so you capture the beginning, middle and end. Dip a clean bucket under the stream, or use a sampling cup on a long handle for pit samples from a safe location. Combine five or more subsamples in the bucket, stir, and pour into the sample bottle. Leave air space in the bottle, since gases form, and don't screw the lid on so tight it can burst. Follow the lab's instructions about cooling.
Sampling solid and semi-solid manure
Solid manure varies from edge to center and top to bottom of a pile. Take subsamples from at least several locations around the pile and at different depths, reaching into the pile instead of just skimming the surface. For bedded packs, sample across the pack. For a manure spreader, collect from several loads or from spots across the spreader pattern using catch pans or tarps, which also tells you spread uniformity.
Put the subsamples on a clean tarp or in a bucket, chop and mix well, then take a portion into the lab bag. Squeeze out air, seal it, and double bag to prevent leaks. Fill the container only to the volume the lab asks for.
For compost, sample after the pile is mixed or turned, from several places, and note how mature it is. Compost may call for extra tests such as stability and salts.
Label, store and ship
Label each container with your name, farm, date of sampling, manure type, and storage source. Don't write the date on the outside using month names if the lab asks for numeric dates, just follow the form. Keep samples cool in the cooler or refrigerator, and freeze if your lab says to. Don't leave them in a hot truck.
Ship promptly, early in the week, using the method the lab recommends. Include the submission form with the tests you want. If the lab asks for a specific package, such as nitrogen forms, specify it. Request results in units you can use, preferably on an as-is basis.
Sample consistently and often
A single sample tells you less than a series. Sample the same way each time, from the same storage and at the same stage, so you can compare years. Repeat when diets, bedding, animal groups or storage change. Many farms sample each year before the major application seasons.
Over time, you'll learn how much your manure varies, and you can rely on tested averages for planning while sampling regularly to check. Take notes about the weather, storage age and any additives, because they explain odd results.
Ask your lab or extension specialist if something looks off. A strange result is often a sampling problem, and a second sample settles it. If your neighbor offers to just "eyeball it," politely decline.