How do I size manure storage?

Add up everything that goes in

FORT COLLINS, Colorado — Sizing manure storage means adding up every volume that goes into the structure over the storage period, then adding rainfall, safety room and a storm allowance. The required days of storage depend on your climate, crops and state rules. It's a calculation worth doing carefully, because an undersized pit overflows at the worst time, and an oversized one costs money you didn't need to spend. Because design affects water quality and safety, have a qualified engineer finish the job.

Pick the storage period

Start with the number of days you need to hold manure. It depends on when you can apply it: frozen winters, wet springs and crop cover all limit application windows. Some farms need a few months, others need six months or more. Your state or the NRCS may set a minimum. A longer period gives you flexibility but needs a bigger structure. Write down your application windows by month to see how long manure will pile up between them.

Add up daily volume

Estimate how much manure each group of animals produces per day. Standard book values exist for lactating cows, dry cows, heifers and calves, and they're published by agricultural engineering societies and used by NRCS. Multiply by number of animals in each group and days of storage. Then add everything else that ends up in the pit: bedding, parlor and milkhouse wash water, flushing water if you use it, spilled drinking water and any runoff from lots. Water use tends to be underestimated, and it can double the volume, so measure it.

Add rain and room to spare

If the structure is open to rain, add the precipitation that falls on it over the storage period, minus evaporation as your engineer calculates it, plus the runoff from any contributing area. Add a design storm allowance, such as the rainfall from a major storm event used by your state's standard, and freeboard, the extra height between full level and the top of the wall. Covering a pit or diverting clean water cuts the volume dramatically and can reduce what you have to build.

Work through a simple sequence

  1. Choose storage days from your application windows and state rules.
  2. Multiply manure production per animal group by head count and days.
  3. Add bedding, wash water and other inputs.
  4. Add net precipitation and runoff.
  5. Add storm allowance and freeboard.
  6. Add sludge room if solids accumulate, such as sand or bedding.

Convert the total to gallons or cubic feet, and divide by the depth to size the area. Your engineer will check the soils, water table, liner and structural design.

Get help and funding

NRCS has a practice standard for waste storage facilities, and staff can help with planning and may offer cost-share. Start at the NRCS site or find an office through the farmers.gov service center locator. Check farmers.gov conservation for assistance programs, and don't start construction before you've confirmed any program rules, since some funding disallows work started in advance. Use the Web Soil Survey to look at your site's soils early. Your state may require a permit or plan review before you build.

Plan for expansion. Herds seldom shrink on their own.