How do I test for coliforms in dairy?

Plates, samples, and what counts mean

MADISON, Wisconsin — You test for coliforms by taking a clean sample, plating a measured amount of it on a coliform-specific medium, incubating it, and counting the colonies that show the right signs. Most farms and small processors use ready-made film plates in a simple incubator, or send samples to a lab that runs the same method. The count tells you how much environmental and manure-type contamination is getting into the milk, which is usually a hygiene story, not a mystery.

Coliforms are a group of bacteria that live in manure, bedding, dirty water and soil. A few in raw milk are normal. A lot says something is off in the milking routine, the bedding, or the wash. In pasteurized milk, any meaningful count points to contamination after the heat step, because pasteurization kills them.

Pick the method that fits your setup

There are two realistic options. The first is a dry rehydratable film plate made for coliform counts. You add a measured amount of milk (or a diluted amount), spread it with the supplied tool, and incubate. Colonies that turn red and trap a gas bubble are counted as coliforms. The second is a lab-run method using agar plates, usually violet red bile agar. Labs do this daily, and the results are comparable from month to month.

If you only do this a few times a year, send it out. If you want weekly checks on a bottling line, a small incubator pays for itself. Follow the plate maker's instructions on incubation temperature and time, because different products specify different settings.

Collect the sample so you don't contaminate it

Most bad coliform results on a farm are sampling errors. Use a sterile container or sterile sampling tool. Wash and dry your hands, then wipe the tank outlet or sampling port with an alcohol wipe and let it dry. Agitate the tank long enough to mix it. Let a little milk flow, then fill the container without touching the rim.

Chill the sample right away and get it to the plate or the lab quickly. Warm milk grows bacteria while you drive. Label each sample with the date, time, source and who pulled it, so the number means something later.

Read the plate without fooling yourself

Count only plates with a countable range of colonies, as the plate instructions describe. Count colonies with the gas bubble, not every red dot. If the plate is crowded or smeared, redo it with a dilution. Run a blank now and then, a plate with sterile water, to prove your technique isn't adding bacteria.

Write the numbers in a notebook or spreadsheet along with what changed that week: new bedding, a wet spell, a different wash chemical. A single result is a snapshot. A series of results is a diagnosis.

Find the source when the count is high

Work backward through the milk path. Check teat prep first, since dirty teats are the most common source. Then check the milking cluster liners, the milk line, the bulk tank outlet and the washing routine. Swab or sample at each point if you need to isolate it. Wet, dirty bedding, muddy lots and warm wash water that's too cool to clean properly are repeat offenders.

If the plant or processor tests your milk too, ask them for your reports. They may already be running coliform counts, and you can compare your results with theirs. The National Mastitis Council at https://www.nmconline.org/ publishes udder health and milk quality guidance, and your state extension dairy specialist can help read the results; start with https://extension.org/.

Know where the rules come from

Regulatory limits for Grade A milk come from the Pasteurized Milk Ordinance and your state regulator, and limits can be revised. Ask your state dairy program or your milk buyer for the current numbers rather than trusting a number you read once. https://www.ams.usda.gov/ is a useful starting point for federal dairy program information, and https://www.usdairy.com/ has industry background on milk quality.

A coliform test is cheap compared with a rejected load. Do it on a schedule, write it down, and when a number jumps, go find the dirty spot. It's usually something simple, and usually something the cows helped with.