How do I use activity monitors?

Set them up, then read them daily

MADISON, Wisconsin — Using an activity monitor well comes down to four habits: fit the device correctly, tie it to the right cow, learn what normal looks like for each animal, and act on the alerts the same day. The hardware is the easy part. Collars, ear tags and leg bands all record movement and send it to a reader, and the software compares each cow against her own recent pattern. What separates a good result from an expensive disappointment is how the people on the farm handle the setup and the daily list. If the alert list gets ignored for three days, the monitor is just a very fancy ear ornament. Here is how to get it running and keep it honest.

Fit, placement and identification

Follow the maker's instructions for the fit, and then check it yourself. A collar that's too loose spins around and reads wrong. One that's too tight rubs and irritates. Ear tags need to be placed in the spot the manufacturer specifies, not wherever is handy in the chute. Write the device number and the cow number down together at installation, and double-check both. Mismatched pairs are the single most common mix-up and the one that produces breeding on the wrong cow. When a cow gets sold, culled or moves pens, update the system that day. Keep a spare set of devices and fresh batteries or chargers on hand, since failed units mean a hole in your data right when a cow is cycling. Walk the herd every few weeks and look for tags that have twisted, collars that have slipped, or devices that are visibly damaged.

Learn the baseline

A monitor works by comparing each cow with herself. During the first couple of weeks, the system has little history on a newly fresh cow, and heifers have even less. Alerts in that stretch deserve extra checking. Learn what the alert looks like for a cow in true heat on your farm. Compare the flag with what you see: is she standing, is there mucus, is she bellowing, are herdmates riding her? Over time you'll learn which cows give a loud alert and which give a faint one. Some cows are quiet cyclers and their rise may be small. Keep a log of flagged cows that turned out not to be in heat, and ask whether the cause was a pen move, a stress event, a feed change or a barn fan going down.

Build a daily routine

Pick a time each day, ideally after the system updates, when one named person reads the list. Put the alert cows into the breeding plan as soon as possible, and note which ones have already been bred, are on a timed program, or are too early after calving. Many herds pair the monitor with a scheduled breeding approach for cows that never alert. Decide ahead of time what you'll do with a cow that has a flag and a history of reproductive trouble. The best routine is dull and repetitive, and it should survive a day when your best hand is sick. Write it down and put the sheet where the crew can see it. A University of Minnesota farm management style approach to routines, which treats them as a job description, works well here.

Check the alerts against the cow

Alerts are a prompt, not a verdict. Before breeding, confirm what you can. Look at the cow, check her record for days since calving or recent treatments, and ask your veterinarian to verify now and then with ultrasound or a milk progesterone test so you learn how accurate your own system is. Watch for the cow with a flag that is really a lame cow or a sick cow shifting around. Many systems also report rumination or lying time that can flag illness, so read those screens too. If you breed on an alert and the cow comes back in, don't just blame the semen. Check the timing, the cow's health, and whether the alert really was heat.

Get the most from your investment

Ask the dealer for training sessions and for the support contact on busy days. Keep your software updated, back up the data, and review reports monthly, not just daily. Look at how many cows are bred in the first available window, how many come back, and how long open cows stay open. Ask your extension office or a university dairy specialist whether local herds have published results. Extension.org and Wisconsin farm management are good starting points. Finally, keep a little skepticism. A monitor is a tool, and the herd still needs eyes and boots in the pen.

If all this sounds like work, it is. But a cow that's seen the day she's ready is a lot cheaper than one that waits three more weeks.