How do I write a nutrient management plan?

Inventory, test, budget, and write it down

LANCASTER, Pennsylvania — A nutrient management plan is a written record of how much nitrogen, phosphorus and other nutrients your fields need, how much your manure and fertilizer supply, and where, when and how you'll apply them so crops get fed without nutrients leaving the field. Writing one means gathering soil, manure and crop information, doing the math, and putting the results on a map with a schedule.

Rules for these plans differ by state and by farm size, so find out what applies to you before you start. Some farms need a plan prepared by a certified planner. Others can write their own. Here's the process.

Check what's required where you farm

Start with your state department of agriculture or environmental agency, your conservation district and your extension office. Ask whether your operation needs a plan, who may write it, and what the plan must include. Livestock operations of certain sizes, farms in sensitive watersheds and operations in cost-share programs often have formal requirements.

If you're working with USDA conservation programs, the Natural Resources Conservation Service has standards for nutrient management plans and can explain how they tie into program eligibility. Start with NRCS or farmers.gov conservation, and visit your local service center. Certified crop advisers and technical service providers can also write plans. You can search for advisers through the Certified Crop Adviser program.

Gather your field information

Make a map of every field, with acres, soil types, slope and distance to streams, wells, ditches, sinkholes and neighbors. The Web Soil Survey gives you soil maps and properties for free. Mark setback areas where applications are restricted or banned.

Then list each field's crop history, planned crops, yield goals based on your own past yields and soil productivity, and tillage practices. Add recent soil test results, taken with the lab's sampling instructions, along with the lab's recommendation method. Soil tests older than a few years deserve replacing, and extension offices can tell you what's customary in your state.

Don't forget fields where nutrients are already high. Phosphorus build-up from past manure is common, and many plans limit more manure on those fields.

Measure your nutrient sources

Manure varies a lot by species, feed, bedding, storage and handling. Don't rely on book values if you can avoid it. Send manure samples to a lab and get nitrogen, phosphorus, potassium and moisture or dry matter. Record the amount produced and stored, in tons or gallons, based on herd size and storage records.

Also list commercial fertilizer, legume credits from a prior alfalfa or soybean crop, and any other inputs like compost, biosolids or imported manure. Each one carries nutrients you should count.

Do the nutrient budget

For each field, start with crop nutrient need based on yield goal and the state recommendation. Subtract credits from soil test levels, previous legumes and any nutrients already applied. What's left is what you need to add.

Then match sources to fields. Put manure on fields that need it and can handle it, and watch the limiting nutrient. In many plans, phosphorus limits manure rates, which can leave a nitrogen shortfall that you fill with commercial fertilizer. Use the application method and timing to estimate nitrogen availability, since incorporation and weather change how much of the manure nitrogen is available to the crop.

Tools from land-grant universities help. Your extension office can recommend calculators. Nutrient Stewardship has material on the 4R approach: right source, right rate, right time and right place.

Write the plan and use it

A typical plan includes a farm map, soil and manure test results, a nutrient budget per field, application rates, timing, methods and setbacks, plus records of what gets applied, when and by whom. Add a section for emergencies, such as spill response and who to call.

Keep application records: date, field, source, rate, method, weather conditions and the operator. Many programs require them, and they help you adjust next year.

Update the plan whenever something changes, like herd size, crop rotation, a new field, or new soil tests. Many states require review after a set number of years.

The short version

Find your requirements, map your fields, test your soil and manure, do the budget, and write it up with records you'll keep. If you're stuck, a certified planner or your local conservation district can walk the first one with you. After that, the yearly updates go faster, and the plan stops being a binder on a shelf and starts being a tool.