How often should I replace liners?
Count milkings, not months
GOSHEN, Indiana — Replace liners by the number of milkings recommended by the liner manufacturer, not by a calendar. The usual guidance is a set milking count that varies by material and design, and busy herds hit it faster than small ones. Check your liner's packaging or the manufacturer's literature for the number, and track milkings so you know when you're there.
Replace sooner if you see cracks, stickiness or a change in the cows. A liner that's still within its count but is hurting teats is done.
Why the milking count matters
Liners are a flexible tube that opens and closes with each pulsation. Over thousands of cycles the material fatigues, stiffens, and loses its massage action. A worn liner may look fine but not perform. It also gets rough or cracked in the barrel and holds bacteria.
Manufacturers test liners and give a life in milkings. Ask your dealer for the number for your specific liner, and ask what conditions the number assumes. Rubber and silicone differ, and so do thick and thin designs. Don't borrow a number from a different brand.
Count in your own barn
To find your liner's replacement date, you need the number of milkings per set. Count the milkings each unit does per day, multiply by days, and mark the date to change. If a unit milks a certain number of cows twice a day, the count adds up fast. Faster-flowing herds and bigger parlors will reach the limit sooner.
Write the install date on the shell or keep a chart in the parlor. A simple wall calendar with the planned change date works. Some farms change all liners at once; others stagger them so not every unit is new at the same time. Ask what your dealer and advisor recommend.
Signs you're past due
Even before the count is up, look for cracks, a rough or sticky inner surface, a barrel that sags or has lost its shape, and thin spots. Cows may kick or the units may fall off more often. Teat ends may look red, swollen or rough. Milking may take longer and strippings may rise.
Cell counts creeping up for no clear reason can be a late sign. If you see any of these, test the system and replace liners. The National Mastitis Council provides information on milking system and liner management.
Cost and planning
Budget liners as a regular expense. Calculate cost per milking so you can compare materials fairly. A cheaper liner replaced often may cost more than a pricier one that lasts. Buy spares so that you can replace them on schedule. Store liners in a cool, dark place, away from sunlight, oil and chemicals that could age them.
When switching liner types, introduce them to part of the herd and watch for changes in milking speed and teat ends. Many dealers will help with a trial.
Do the replacement properly
When you change liners, check shells for damage and remove any debris. Mount new liners according to the instructions without twisting or overstretching. Inspect short milk tubes and gaskets, and replace them if worn. Run the system and watch for air leaks or noise.
Keep the log, including who did the work and when. Ask the technician who tests your system to check liner condition and fit, and ask for extension help or an AABP veterinarian if teat ends look bad.
Following the number in the manual won't win you any awards, but it will keep your cows comfortable and your cell count steadier. It is a cheap way to protect a lot of milk.