How do I choose a brine tank?

Size it to the cheese, build it to clean

WINDSOR, Colorado — To choose a brine tank, size it to the cheese you'll float or submerge in it, pick a food-grade material that handles salt, and plan how you'll cool, filter and clean the brine. Salt is hard on materials and brine is a place where bacteria can live, so the tank is more than a bucket of salty water. Think of it as equipment you'll manage, not just fill.

Size and shape

Brine tanks hold wheels or blocks that need to be fully covered or floated, with room for turning. Count the cheese you brine per day and how long each wheel stays in the brine, which depends on the cheese size and recipe. Allow room for all wheels in the tank at once, plus a margin for growth. Too small a tank forces crowding, which prevents even salting. A shallow wide tank is easier to reach into. A deep one holds more brine per footprint but can be hard to reach.

Materials

Salt corrodes many metals. Food-grade plastic tanks, such as polyethylene, are common and don't rust. Stainless steel can work, but only grades that tolerate salt, and ask the maker which grade they use. Poor-quality stainless pits and corrodes in brine. Avoid anything with exposed lower grade metal, galvanized parts or painted surfaces. Check that all materials are approved for food contact by your regulator. The USDA AMS dairy programs and FSIS give background on dairy and food safety standards.

Temperature, circulation and drainage

Brine is usually held cool so cheese salts evenly without warming. Plan for a refrigerated room or a chilling system. A pump for circulation prevents salt layers and equalizes temperature. A drain valve at the bottom helps you empty and clean the tank without lifting. Think about how you'll move heavy wheels in and out, with racks, lifts or baskets, and how you'll protect your back.

Managing the brine

Brine needs maintenance. Cheesemakers commonly check salt concentration with a hydrometer or refractometer, and keep pH and calcium in the range their recipe and training recommend. Filter out bits of curd and cheese regularly, and clean and replace brine on a schedule. Ask your state dairy regulator or an experienced cheesemaker what applies to your product. Keep a log of salt level, temperature, filtration and changes.

Questions to ask before buying

  1. What material is it, and is it rated for salt contact?
  2. Can I reach every corner for cleaning?
  3. How will I cool it, and does the price include that?
  4. Are there lids, racks and baskets available?
  5. How do I dispose of used brine legally? Check with your wastewater authority first, since salt wastewater is regulated in many places.

Training and support

Cheesemaking courses through eXtension and university dairy programs often cover brining in depth. If you're borrowing money to buy equipment, the USDA farm loans page is a good place to start.

Safety around brine rooms

Brine rooms are wet, salty and cold, which makes floors slippery and metal corrode. Use non-slip flooring or mats, keep drains clear and wear boots with good tread. Lift wheels with the right gear and don't lean over the edge of an open tank. Wash and rinse salty equipment, because salt left on metal pits it. Keep electrical outlets and equipment away from splash zones and use ground fault protection. The OSHA agriculture page offers workplace safety information.

Plan for cleaning access

You'll need to drain, scrub and sanitize the tank on a schedule. Make sure you can reach the bottom, corners and fittings, and that the tank can be fully emptied. A tank you can't clean is a tank that will cause problems.

Consider the cheese you'll salt

Different cheeses spend different times in brine, and some are dry-salted instead. Soft and semi-soft wheels often take less time than large hard wheels. Check your recipe before buying, because a tank sized for small wheels might not handle your future big ones. Ask other cheesemakers who make your style how they set up their brining, and visit if they let you. Real setups teach more than catalogs do.

A brine tank is easy to overlook, right up until it starts showing signs of neglect.