How do I choose a cheese press for production?

Pick by cheese type, volume and pressure control

BURLINGTON, Vermont — Choose a production cheese press by the style of cheese you make, how many molds you need to press at once, and how well the press controls and holds pressure. A home screw press may work for a few wheels. A production plant needs something that presses many molds evenly, stays clean, and doesn't need a person standing next to it. Start by writing down your recipes and your daily make size.

Pressing method

Presses fall into a few groups.

Some cheeses, such as fresh and soft types, hardly need pressing. Hard and semi-hard cheeses do, and those recipes often specify a pressure schedule that increases through the process.

Capacity and layout

Count how many molds you fill per make, and add room for growth. Check the press footprint against your floor plan, the height of your ceiling, and the path from the vat to the press. Heavy lifting adds up, so put the press at a height that doesn't hurt your back. A press that holds eight molds at once and is next to the vat saves more labor than a cheaper model across the room.

Materials and sanitation

Look for stainless steel (food grade) in contact with product and surfaces you can reach with a brush. Avoid crevices, exposed threads and painted surfaces that chip. Ask whether parts come off for cleaning and how long that takes. Plastic parts should be food-grade and in good repair. If your plant is inspected, ask your regulator about equipment standards before you buy. The FSIS provides food safety information, and the USDA AMS dairy programs discuss grading and standards for dairy products.

Pressure control and records

Ask whether the press has a gauge you can read and calibrate, and whether you can set and repeat pressure steps. Consistent pressing produces consistent moisture and texture, which means consistent aging. Some presses allow timers. Others rely on you, a clock and a good memory.

Questions for the seller

  1. What pressure range does it cover, and how is it measured?
  2. Can I get replacement seals, gauges and parts, and how fast?
  3. Which cheeses do other customers press on it?
  4. What cleaning method do you recommend?
  5. Can I see it running, or talk to a customer of my size?

Budget, service and growth

Compare the full cost: freight, installation, air compressor if pneumatic, and downtime when something fails. A used press can be a bargain if you can get parts. Think about whether you may add a second recipe or a larger vat. The USDA farm loans page is a place to start looking at financing, and Cornell Small Farms has resources for diversifying into value-added products.

Think about follow-through

A press is only one step in a process that includes vat, molds, brine and aging. Check that the press fits the rest of your line. Molds must fit the press platens or frames, and the weight of a loaded rack should be something your crew can handle. If you buy molds and a press from different makers, check dimensions before you pay.

Plan your first batches

Before running a full production make, run test batches with water-filled molds to check pressure, drainage and workflow. Then press small batches of real cheese, and keep notes on pressure, time, moisture and finished texture. Small adjustments in the first weeks are much cheaper than a big batch of cheese that turned out too wet or too dry.

Think about noise, air and utilities

Pneumatic presses need a compressor, air lines and a dry air supply, and compressors are loud. Plan where the compressor sits and how the air line gets to the press. Hydraulic units need an electrical supply and a spot for fluid leaks that won't reach food areas. Ask the maker which fluids are food-safe if a leak could ever touch product.

A good press is dull, consistent and easy to clean. That's high praise in a cheese plant.