What should I inspect before buying used equipment?
Check the wear, the welds and the paperwork
NEW HOLSTEIN, Wisconsin — Before buying used dairy equipment, inspect the product-contact surfaces, seals and gaskets, electrical and motor condition, signs of leaks or repairs, and the maintenance history, and run it if you can. You're checking three things: whether it's sanitary, whether it works and whether you can keep it working. Bring a flashlight, a notepad, a phone for photos and, if possible, someone who knows the equipment.
Start with identification and paperwork
Record the make, model, serial number and age from the nameplate. Ask for the manual, service records and any inspection or test reports. A seller with a folder of records is usually a seller who took care of the machine.
Search the model for known problems and confirm that parts and service are still available. Ask why it's being sold. "Upgraded to bigger" is a different answer from "never worked right."
Inspect the stainless and product-contact surfaces
On tanks, pipelines, fittings and receivers, look closely at stainless steel. Check for:
- Deep scratches, pitting or rough patches that can hold bacteria
- Cracks, dents or poor weld repairs
- Corrosion or staining, especially in seams
- Warped or damaged inner liners on tanks
- Loose or damaged fittings
Shine a light inside. A surface that looks cloudy or rough under light won't clean well. Ask whether the equipment met sanitary standards and whether your milk buyer and state regulator accept it.
Check seals, hoses and moving parts
Examine gaskets, seals, valves and hoses. Brittle, swollen or cracked rubber is a sign of age or chemical damage, and replacement costs should go in your price. Check pump housings, impellers and shafts for wear. On vacuum pumps, look at oil condition, leaks and unusual noise. On pulsators and milking units, check for stiff or damaged parts.
Turn bearings and shafts by hand where safe and listen for roughness. Look for oil leaks, rust at mounts and loose belts.
Test the refrigeration and electrical system
For bulk tanks and compressors, ask to see it run. Does the compressor start cleanly? Does the agitator turn smoothly and seal tightly? Check condenser coils for damage and the wiring for burns, frayed insulation or amateur repairs. Look at the control panel and sensors.
Have a refrigeration technician check refrigerant type and charge, since some older refrigerants are harder to service. Request voltage and phase information to confirm it fits your power. The OSHA agriculture page covers general electrical and machinery safety.
Make the offer conditional
Before paying, put these conditions in writing if possible:
- Equipment is as described and runs on test.
- Seller provides clear title and no liens.
- Serial numbers match the paperwork.
- You may have a technician inspect it.
- Removal and delivery terms are clear.
Ask your lender or Farm Service Agency office if financing terms require title documentation. Compare the final price with the cost of new or reconditioned equipment, including repairs and installation. If the seller won't let you inspect or run the equipment, treat that as information. A good machine rarely needs to be hidden.