Which lab tests matter for dairy feed?

Pay for the numbers you'll use

MADISON, Wisconsin — The lab tests that matter most for dairy feed are the ones that change a ration decision: moisture, protein, fiber and its digestibility, energy estimates, starch where relevant, minerals, and fermentation quality for silage. Add targeted tests like nitrate or mycotoxins when conditions call for them. There's no sense paying for a long panel if nobody reads it.

Here's what to ask for, and why.

The basics every forage should get

Start with dry matter, crude protein, acid detergent fiber (ADF), neutral detergent fiber (NDF), and ash. These tell you how much feed you've got, how much protein, and how fibrous it is. Most labs report energy estimates calculated from these and other values.

Add fiber digestibility, often reported as NDFD, which measures how much of the fiber a cow can digest. Two forages with the same NDF can feed very differently if their digestibility differs.

Starch and corn silage

For corn silage and high-moisture corn, starch matters, and so does kernel processing. Some labs offer a starch digestibility estimate or a kernel processing score. Ask your nutritionist whether it's worth paying for.

Silage fermentation

For silage, a fermentation panel measures pH, lactic and volatile fatty acids, and ammonia. It tells you whether the silage fermented well or whether you have a poor-quality batch, with clues like high butyric acid or high ammonia. Heated or spoiled silage may also be flagged. These help explain intake problems that the basic panel won't.

Minerals

A mineral test covers calcium, phosphorus, magnesium, potassium, sodium, sulfur and chloride, and sometimes trace minerals. These feed into dietary cation-anion balance calculations for dry cows, and help set your mineral program. Potassium in forage, for example, affects dry cow management.

Special tests when conditions call for them

These tests cost more, so use them where they apply.

Wet chemistry versus NIR

Most routine forage tests use near-infrared estimates, which are quick and cheap. Wet chemistry is the reference method and may be better for byproducts, unusual feeds or checking a surprise result. See our companion article on NIR testing.

Sampling decides everything

A lab result only describes the sample. Take sub-samples from many places, mix them, and send a clean, labeled sample quickly and cool. Test each field and cutting separately where practical, so you can see differences. See the silage sampling article for the details.

How often

Test every new forage lot, and retest when something changes: a new field, a new cutting, a bunker face that's gone through a rainstorm. High-yield herds benefit from frequent testing because small changes hit milk. Others can test less often but shouldn't skip it.

A simple order of priority

  1. Dry matter, protein, fiber and digestibility on every forage lot.
  2. Starch on corn silage.
  3. Fermentation panel on every silage.
  4. Minerals on forages and water as needed.
  5. Special tests only when risk calls for them.
  6. Mycotoxin and nitrate tests after weather stress or visible spoilage.

For help choosing labs and interpreting tests, check Extension.org, Penn State Extension, and UW Extension farm resources. Iowa State's Ag Decision Maker offers feed cost tools.

A test you never use is the most expensive one on the report. Buy numbers you'll act on.