How do I store feed to prevent spoilage?
Dry, packed and covered
CEDAR RAPIDS, Iowa — Preventing feed spoilage comes down to controlling moisture, air, heat and time. Dry feeds spoil when they get wet. Silage spoils when air gets in. Grain spoils when it's stored too moist or too warm. Get those variables under control and you'll cut most of your losses.
Spoiled feed isn't only a waste of money. Moldy or heated feed can cut intake, drop milk and carry toxins. So storage is part of animal health.
Hay
Hay stores safely when it's dry enough at baling. Baling hay too wet leads to heating and mold, and in rare cases to spontaneous combustion. Use a moisture tester, and follow your extension office's guidance on safe moisture levels for the bale type. Round bales stored outside lose more than those under cover. Store off the ground, with space between rows for air, and under a roof if you can.
Cover and tarps help. Stacking hay in a barn or shed costs more upfront but often pays back in less spoilage, especially for high-quality hay.
Silage
Silage keeps by fermenting without oxygen, so the key steps are packing tightly, covering quickly, and sealing well. Use plastic sheeting with weights across the top of a bunker or pile, and seal the sidewalls. Check the cover for tears or holes regularly and patch them.
At feed-out, take a clean face each day. The more face you expose and the slower you feed, the more air gets in and the more feed heats. Keep the face smooth, not ragged, and remove only what you'll feed. Your nutritionist can help set a feed-out rate for your system. Be careful around bunker faces, since silage can collapse. Safety guidance is available through OSHA's agriculture page.
Grain and commodity feeds
Grain stored in a bin needs to be dry enough and cool. Your extension office can give moisture targets for the grain and storage period. Aerate bins to cool grain, check for hot spots and crusting, and watch for insects. Clean out old grain before filling a bin with new, as old residue breeds mold and bugs.
Bagged feeds and byproducts should be stored in a dry, closed area, off the floor, away from rodents. Use first-in, first-out rotation.
Wet byproducts and commodities
Wet byproducts such as distillers grains, brewers grains and wet beet pulp spoil quickly. Plan how fast you'll use them and match deliveries to your feeding rate. Packing and covering extends life, and so can ensiling with other feeds, but ask for advice first.
Keep feed clean on the farm
Clean mixer wagons and bunks. Remove refused feed every day, especially in warm weather. Keep birds, rodents and pets out of feed storage, since they carry disease and contaminate feed. Sweep up spilled feed rather than let it rot.
What to watch for
- Heat, steam or a sour or musty smell.
- Visible mold or clumping.
- Cows refusing feed or sorting it.
- A sudden drop in milk or intake.
- Insects in grain.
If you suspect mold, consider testing for mycotoxins (see our companion article) and talk to your nutritionist and vet.
Storage plan checklist
- Know the moisture of each feed at storage time.
- Store dry feeds off the ground and under cover.
- Pack and seal silage tightly, and check the cover often.
- Feed out fast enough to stay ahead of heating.
- Clean bins and bunks between lots.
- Control rodents and birds.
For more on storage and feed quality, Iowa State's Ag Decision Maker and Extension.org are useful, and Penn State Extension has silage and hay resources.
Spoilage doesn't send an invoice, but it takes the money all the same.