How do I test colostrum quality?

A refractometer pays for itself

GREELEY, Colorado — You can test colostrum quality on the farm with a tool called a Brix refractometer, which estimates how much solid material, mostly antibodies, is in a drop of colostrum. A colostrometer, a floating hydrometer, does the same job by density. Either one beats guessing from the color or thickness of the milk, which tells you very little.

Good colostrum is the cheapest insurance in a calf program, and a refractometer is a small investment for any dairy that raises its own calves.

Brix refractometer, the common choice

A digital or optical Brix refractometer reads a drop of liquid and gives a percentage. For colostrum, many programs treat readings of around 22 percent or higher as good-quality colostrum for feeding. Your veterinarian may suggest a slightly different cutoff, so ask.

Here's how to use one:

  1. Calibrate with clean water, which should read zero.
  2. Bring the colostrum sample to room temperature, because cold or hot samples read wrong.
  3. Place a few drops on the prism, close the cover, and read the scale.
  4. Wipe it clean between samples and rinse with water.

An optical model is cheaper and needs no batteries, but you have to read the line by eye. A digital model is easier for tired people at midnight.

Colostrometer, the density method

A colostrometer is a floating tool that sits at different levels depending on the density of the sample. It's marked in color zones. It's temperature sensitive, so the sample should be at the correct temperature, and it works best with colostrum that isn't frozen or very thick. It's also more fragile and slower than a refractometer. Many farms use it, but fewer new buyers choose it now.

Sampling matters

Take a sample from the first milking, after you've mixed the milk. Test each cow separately, and keep records so you can see whether certain cows or seasons give poor colostrum. Do not test a pool, since the average hides weak batches.

Mark the container with the cow's number and the reading. Freeze only the good colostrum, in labeled bags, flat in small portions. Note the date on a label in your own system, though not on the farm sign out front.

What affects quality

Several things can affect the antibody content of colostrum: how long after calving the cow was milked, the cow's age and health, the dry period length, and dilution if she leaked or was milked late. First-calf heifers often produce lower-quality colostrum, so test them. Waiting to milk past the first several hours can dilute the antibodies.

A cow that leaked milk before calving may have lost antibodies too. Test her anyway.

Test the calf, too

Colostrum testing tells you what you fed. Blood testing tells you what the calf absorbed. At one to two days of age, a serum total protein reading with a refractometer gives a quick read on passive transfer. Ask your vet what target to use. If many calves fall short, look at timing, volume, cleanliness and cow management, rather than blaming the cows.

The American Association of Bovine Practitioners can help you find a vet who does calf health work, and Extension.org and Penn State Extension publish colostrum management resources. The National Agricultural Library can also locate peer-reviewed material.

Make the testing a habit

Keep a clipboard, a refractometer, and clean sample cups in the maternity area. Anything you have to hunt for won't get used. Train every person who might be on a night shift, and put the cutoff number on a laminated card so nobody has to guess.

A refractometer reading takes about a minute. Compared with the cost of a sick calf, it's about the cheapest minute on the farm.