How do I test water quality for dairy?
Sample the source, test what matters
HEREFORD, Texas — You test water quality for a dairy by taking clean samples from the source and from the points where water is used, sending them to a certified water lab, and repeating at a regular schedule, plus any time something changes. Dairy uses water for drinking, cleaning, cooling and sometimes processing, and each use has its own risks. A well that tested fine last spring may not be fine after heavy rain, a nearby spill, or a failing seal. So test, record, and retest. Your state or local health department and your extension office can tell you which labs are certified in your area.
Know where water is used
Map every water use: cow drinking water, milk house wash water, hot water heater, plate cooler water, parlor and equipment cleaning, and any water that touches milk or processed product. Water that contacts milk or equipment needs the cleanest quality. Cow drinking water has different priorities, such as salts and nitrates. Sample at the source, such as the well, and at the point of use, such as the milk house tap, because plumbing can add contamination.
Collect samples correctly
Get the sterile bottle and instructions from the lab. Remove aerators and screens from taps, let water run for a few minutes, avoid touching the inside of the bottle or the cap, fill to the line, label with date, time and location, chill, and deliver quickly. Ask about hold time limits. For bacteria, use the lab's sterile container and don't rinse it. For chemical tests, the lab may provide different bottles with preservatives. Don't improvise containers.
Tests to ask for
Start with total coliform and E. coli to show bacterial contamination. Add nitrate, pH, hardness, total dissolved solids, iron and sulfate depending on your area and use. Hardness and iron affect cleaning chemistry and equipment scaling. Nitrate matters for animal health. Ask your extension office what contaminants are common in your region. The EPA pesticides page and Extension.org offer related information.
Set a testing schedule
Test private wells at least on a regular yearly basis for bacteria, and more often if there's a problem, flooding, repair work or a change in taste, smell or color. Test after any well work. If you rely on surface water, such as ponds, test more often and expect to treat it. Keep results with the date to spot changes. Your regulator may have a required schedule for Grade A or licensed processing operations.
Act on results
If bacteria show up, find the source: a cracked casing, an unsealed wellhead, a nearby manure pile, or a plumbing cross-connection. Disinfect and retest. If minerals are high, consider treatment or a different source for cleaning water. Don't use untreated questionable water to wash milk equipment. Penn State Extension has well-water material, and the NRCS can advise on protecting water sources from runoff.
Keep the well healthy
Keep manure, fuel and chemicals away from wellheads, cap the well properly, and check the cap and casing each year. It's cheaper than a rejected load.