What backup power do dairies need?
Size it to the loads that matter
BAKERSFIELD, California — Most dairies need a generator sized to run the bulk tank, milking system, water supply and ventilation, connected through a proper transfer switch. How big depends on your equipment, so an electrician or generator dealer should do the load calculation. Buying by horsepower of the tractor you already own is a start, but not a plan.
Backup power exists to keep milk cool, cows milked and water flowing until the grid returns. List what has to run, add up the electrical load, and size from there.
List your essential loads
Walk the dairy and write down every motor and device you would need in an outage. Typically that includes bulk tank compressor and agitator, vacuum pump, milk pump, water heater, wash system, water pumps, ventilation fans, lights, and controls. Note the voltage, phase, and running and starting amps from each nameplate.
Motors draw much more power at startup than while running, so the generator must handle the starting surge. Staging, where you start large motors one at a time, lowers the peak requirement. Ask your electrician about soft starters or other ways to ease startup loads.
Generator types and sizes
Common options include tractor-driven PTO generators and standalone engine-driven units powered by diesel, gas or propane. PTO units use a tractor you already own, but the tractor has to be available, and it's tied up for the outage. Standalone units can start automatically with an automatic transfer switch, which is useful if no one is on the farm.
Diesel is common for larger units because of fuel storage and efficiency. Propane or natural gas can be convenient, though supply during a widespread emergency is worth considering. Ask the dealer about fuel use and how long you can run on a tank.
Transfer switch and wiring
A transfer switch disconnects your farm from utility lines before connecting the generator. It protects utility workers from backfeed and prevents damage to your equipment when power returns. Have a licensed electrician install it and size it for the load.
Manual transfer switches work if someone's around to operate them. Automatic ones start the generator and switch the load themselves. Mark the connection points and label breakers so anyone can follow the plan.
Maintenance and testing
A generator that hasn't run in a year may not start. Exercise it on a schedule, ideally under load. Change oil, filters and coolant as the manufacturer says, keep the battery charged, and keep fuel fresh. Check fuel supply and have a refuel plan.
Keep it in a ventilated place and never run it in a closed building because of carbon monoxide. OSHA's agriculture page and NIOSH agriculture provide safety resources.
Cost, funding and planning
Generators and transfer switches are a major purchase. Compare quotes and ask what's included. Ask your utility about any programs and your insurance agent about coverage for equipment and spoiled milk. For financing, look at farmers.gov loans and ask your Farm Service Agency office about current options. Conservation and energy programs through NRCS sometimes cover energy-related items, so ask what is currently available.
If a full-farm generator isn't possible, prioritize: tank first, milking second, water third. Have a plan for partial power and a way to hand-milk if needed. See our article on handling power outages for steps to follow.
Write the plan, test the machine and talk with your milk buyer ahead of time. Backup power is like insurance; you hope the dealer is wrong about needing it, and you'll be glad you bought it when you do.