What is the best bedding recovery system?

There isn't one best system

WAUPUN, Wisconsin — No single bedding recovery system is best for every dairy. The right one depends on your bedding type, manure handling, herd size, and whether you can tolerate the extra management. Recycled manure solids bedding, composted solids, and sand reclamation are the main options, and each needs a different setup and carries different risks for udder health.

Recovering bedding can cut purchased bedding costs and keep nutrients on the farm, but poor-quality recycled bedding can raise mastitis problems. So the real question is which system you can run well every day.

Recycled manure solids

Mechanical separation, usually with a screw press, takes solids out of the manure stream, and many farms then dry or compost them before use as bedding. Raw separated solids are warm, wet, and high in bacteria, so most farms process them further. Composting or mechanical drying lowers moisture and bacteria counts. Bedding that feels damp or smells strongly is a warning sign.

This approach fits freestall barns using sawdust or sand alternatives, with a separator already working. Talk to your herd vet and milk quality advisor before switching, and monitor bulk tank somatic cell count and clinical mastitis closely for weeks afterward.

Sand recovery

Sand is a favorite freestall bedding for cow comfort and udder health, but it's brutal on pumps and pits. Sand separation systems, such as settling lanes, sand traps and hydrocyclone-type units, pull sand out of flushed or scraped manure so it can be dried and reused. Flush water volume, lane length and flow velocity determine how well sand settles while organic matter moves on.

A good sand system saves money and protects pumps, but it takes space, water, and maintenance. Ask sellers what percentage of sand they typically capture on farms like yours, and verify with references rather than brochures.

Compare on the same terms

When comparing options, build a simple worksheet:

  1. Annual bedding volume you need.
  2. Capital cost, plus installation and electrical work.
  3. Operating cost: power, labor, repairs, screens or liners.
  4. Impact on pit volume, manure hauling, and nutrient plan.
  5. Risk to udder health and how you'll monitor it.

Include your own labor honestly. A system that takes an hour of fiddling a day isn't free.

Watch cow health and comfort

Whatever you choose, track results. Check stall cleanliness, hock lesions, bedding moisture, and mastitis cases by pathogen. The National Mastitis Council at nmconline.org publishes udder health guidance, including on bedding management. Culture milk from clinical cases to see whether the bacteria in your herd change after a bedding switch.

Replace bedding on a routine schedule and keep stalls level and dry. Even the best recovered bedding fails in a stall that's wet at the back.

Where to get help

Your milk quality person, nutrient planner and equipment dealers each see a different part of the picture. Pull them together before spending money. Check with university dairy extension, such as University of Wisconsin farm resources, and eXtension for current research summaries on recycled bedding.

Visit at least two farms using the system you're considering, and ask what they'd do differently. Ask how it performed in a cold, wet winter, since that's when bedding systems show their weak points. A system that looks great in July but freezes solid in January isn't worth the steel it's made of.