What is the best way to compost dairy manure?
Balance carbon, air and moisture
ELKHORN, Wisconsin — The best way to compost dairy manure is to mix it with a carbon-rich bulking material such as sawdust, wood shavings, straw or dry leaves, aim for a moisture level like a wrung-out sponge, build piles or windrows that hold heat, turn them often enough to keep oxygen flowing, and let the process run until the pile cools and the material is stable and earthy-smelling. Done well, compost is easier to haul, lower in odor and safer to handle than raw manure.
Dairy manure is wet and rich in nitrogen, so on its own it packs down and turns sour. The job is to fix that balance.
Set the recipe: carbon, nitrogen and moisture
Microbes need carbon and nitrogen in a workable ratio. Commonly cited targets are a carbon-to-nitrogen ratio somewhere around 25 to 30 parts carbon to one part nitrogen at the start. Fresh dairy manure runs low in carbon, so add bedding or other dry carbon material. Bedded pack manure already has some, and may need less added.
Moisture should feel damp but not drip when squeezed, commonly cited in a range around 40 to 60 percent. Too wet and the pile goes anaerobic and stinks. Too dry and the process stalls. Lab tests can help you check the mix, and your extension office can suggest ratios for your materials. Extension.org and Cornell's small farms program have composting guides.
Pick a site and build the pile
Choose a well-drained, level spot with a firm base like compacted gravel or a concrete or asphalt pad, set back from wells, streams and property lines, with runoff controlled. Keep clean water out and collect or divert pile leachate. Check your state's rules, because some require permits or setbacks for composting operations beyond a certain size.
Build piles or windrows large enough to hold heat but small enough to get air into. Size depends on your equipment, so ask your extension specialist about dimensions. Layer or mix ingredients with a loader or mixer wagon, and blend as evenly as you can. A pile built from a bucket of this and a bucket of that, with no real mix, composts unevenly.
Manage air and heat
Compost needs oxygen. Turn windrows with a turner or loader on a schedule, often more frequently at first and less later, based on temperature and odor. Aerated static piles use perforated pipes and fans instead of turning. Passively aerated systems rely on pipes and bulky material.
Temperature tells the story. A healthy pile heats up in a few days. Check it with a long-stem compost thermometer in several spots. A separate article covers temperature targets in depth. If a pile never heats, it may be too dry, too wet, short of nitrogen or too small. If it smells like ammonia, it may need more carbon. If it smells rotten, it needs air and probably less water.
Finish, cure and test
After the active heating phase, piles cool and enter a curing stage where the material stabilizes. The whole process often takes weeks to months, depending on method, weather and management. Finished compost looks dark, crumbly and earthy, with no recognizable manure smell, and it doesn't reheat when turned.
Test the finished product. A lab can report nutrient content, salts, pH and maturity indicators. Use the results to set application rates in your nutrient plan, since compost nutrients are released more slowly than raw manure, and phosphorus still counts. Screening gives a finer product for sale or use in potting mixes.
Handle safely and legally
Hot piles can burn, and dust from dry compost carries spores that irritate lungs, so wear a mask when turning. Piles can also catch fire if they're huge, dry and hot, so keep size reasonable and watch for hot spots. The CDC NIOSH agriculture program has safety information.
If you plan to sell compost, check state rules on labeling and quality. If you grow certified organic, the National Organic Program rules set specific requirements for compost used on organic fields, including time and temperature standards. Ask your certifier before you start.
The short version
Mix manure with dry carbon, keep it damp, give it air, watch the heat, cure it and test it. Composting adds work, but you get a product that stores, hauls and spreads better, and that people buy. Just remember that compost is patient and you probably aren't.