What is the best way to handle flush manure?

Flush systems need a plan for the water

BUFFALO, New York — Flush manure is mostly water carrying manure, which changes how you store it, separate it, move it and spread it. The best way to handle it is to build the system around the water: capture solids early, recycle flush water where you can, and size storage for volume, not just nutrients. Farms that treat flush water like a resource tend to do well. Farms that treat it like waste end up with lagoons that fill quickly and neighbors who notice. The steps below walk through the system from alley to field.

Understand what flush manure is

In a flush system, water runs down alleys and carries manure to a collection point. The result is thin, high-volume manure with low dry matter. That makes it easy to pump but means you store and haul a lot more water. Nutrients are present but diluted, so application rates by volume differ from those for thicker manure. Your nutrient management plan should be based on a lab analysis of your actual manure, not a book value, and you should resample when the ration, bedding or water use changes. Extension resources describe how manure type changes handling and application.

Separate solids early

Many flush systems use a separator, settling basin or a combination to remove solids before the water is reused or stored. Removing solids keeps pumps cleaner, reduces lagoon sludge and gives you solids you can compost or use as bedding. If sand bedding is used, sand lanes ahead of the separator are usually essential. Design depends on flow rate, solids content and bedding, so get help from an engineer or a technical planner at NRCS rather than copying a neighbor's setup. What works on a barn with a different bedding and cow numbers may fail on yours.

Recycle flush water

Reusing water from a storage cell or lagoon cuts the amount of fresh water you need and reduces total volume to manage. Water quality matters. Recycled water should be low enough in solids and odor that it doesn't cause problems in the barn or on cows. Pumps, nozzles and flush tanks need maintenance, and lines can clog. Check with your veterinarian and milk quality advisor about any issues with recycled water in the barn. Keep an eye on air quality and cow cleanliness after any change, and keep a simple log of when you switched sources so you can connect cause and effect.

Size and manage storage

Because flush systems create so much volume, storage capacity is often the limiting factor. Calculate daily volume, include rain and runoff where applicable and plan for the longest period you can't spread. Leave freeboard, and know your state's rules on design, liners and setbacks. Check storage levels on a schedule, and write them down. Install a marker or gauge you can read from the road so nobody has to guess. Don't wait for the lagoon to tell you it's full by overflowing. Regulators remember overflows, and neighbors do too.

Apply it at the right rate and time

Thin manure can be applied by irrigation, tankers or drag hoses. Application rate should come from your nutrient plan and soil tests, with attention to crop uptake and soil moisture. Thin manure can run off or move through the soil quickly, especially on tile-drained or sloping ground. Avoid application ahead of heavy rain or on frozen or saturated fields. Use calibrated equipment and keep records of volume per acre. A Certified Crop Adviser, found through the Certified Crop Adviser program, can help you tie application to crop need.

Odor and neighbors deserve a plan. Thin manure sprayed or agitated on a warm, still day will get noticed. Check wind direction and the forecast, avoid spreading before weekends and holidays when you can, and tell nearby neighbors when a big job is coming. Injecting or incorporating reduces odor and nitrogen loss, and low-pressure application with a drag hose or low-trajectory nozzles drifts less than a high-angle gun.

Walk through your system once a year, from the flush tank to the last field. Look for plugged lines, worn pumps, cracked concrete, leaks at storage walls and anything that has changed since last season. Compare your actual water use against what you planned. If volumes have crept up, find out why before storage runs short.

Handling flush manure is mostly about discipline: separate, recycle, store enough and spread carefully. Sit down once a year with your planner and review it. Water is cheap until you have to haul it.