What is the best way to make gouda?

Washed curd, gentle press

SIOUX CENTER, Iowa — The best way to make gouda is to follow the washed-curd method: set whole milk with a mesophilic starter and rennet, cut the curd small, drain part of the whey and replace it with warm water, press the curd into a wheel, brine it, and age it. The washing step is what separates gouda from cheddar. It removes some lactose, which limits acid, and that gives the cheese its sweet, supple, mild character. Skip it and you'll get something closer to a sour, crumbly cheddar cousin.

Milk and starter

Whole cow's milk gives classic gouda, though goat and sheep milk also work. Use pasteurized, non-UHT milk, or follow your state's raw milk aging rules if you use raw milk. Heat to about 90 degrees Fahrenheit, add a mesophilic starter and let it ripen the milk, then add diluted rennet. Add calcium chloride if your milk was pasteurized. The curd should set into a firm gel, which you test for a clean break before cutting. Use the recipe's timing as a guide but trust your eyes and a clean knife.

Cut, wash and cook

Cut the curd small, about the size of a kernel of corn. Stir gently so pieces don't mat. Then remove a portion of the whey, often around a third, and replace it with warm water. This is the washing step. The warm water also raises the temperature of the curd mass, which firms it and drives out more whey. Hold the curd in the pot, stirring, until it is firm and springy. Recipes differ on exact amounts and temperatures, so follow a reliable source and keep a thermometer in the pot. The final cooked temperature is usually in the mid-90s to low-100s Fahrenheit.

Press properly

Drain the whey and pack the curd into a mold lined with cheesecloth. Press lightly at first and increase weight in stages, flipping and re-dressing the cheese. Even pressure matters more than raw force: a cheese pressed too hard too soon seals the surface and traps whey inside. A traditional gouda wheel presses for several hours, and many recipes call for an overnight stage. When the wheel is smooth and closed, with no visible gaps, it is ready for brine.

Brine, dry and age

Float the cheese in a saturated or near-saturated salt brine for a set time based on its size, flipping it halfway. Then air-dry the wheel for a few days until the rind is dry to the touch. Coat it with cheese wax or a breathable rind coating and age it at about 50 to 55 degrees Fahrenheit. Young gouda is ready in a month or so, but flavor deepens at several months and beyond. Wax prevents mold and moisture loss, but it also slows the development of a natural rind. Pick the finish that matches the cheese you want.

Troubleshooting

Many of the tools and records you'd want for selling cheese are covered by USDA AMS local and regional food resources, and extension offices such as Penn State Extension publish cheesemaking basics. Check your state for licensing.

Choosing how long to age

Gouda is flexible, and that is part of its appeal. A young wheel, aged a month or two, is mild, springy and good for sandwiches. Wheels aged several months turn firmer and sweeter. Long-aged gouda can become hard, caramel-flavored and sprinkled with small crunchy crystals. Pick a finish date before you start, and write it on the wheel. If you wax the wheel, check it every couple of weeks for cracks or air pockets, since mold under a damaged wax coat can ruin the cheese. Keep wheels on a clean shelf, turn them regularly and use a thermometer and a hygrometer, so the cellar is something you measure rather than guess at.

Gouda is a good second cheese because it doesn't need a cave, only a corner and some patience. Be ready to explain why the cheese in the garage is not available for tasting yet.