What is the best way to manage processing water?

Clean in, clean out, and less of both

PULLMAN, Washington — Water in a dairy plant has two jobs, and both have rules. It has to be safe going in, because it touches product and equipment. It has to be handled properly going out, because it carries milk solids and cleaning chemicals. Between those two ends, there is plenty of room to waste it. Managing water well means knowing the source, the uses and the discharge.

Make sure the source is safe

Water used in a dairy plant must be of safe, potable quality, and regulators typically require testing. If you use a private well, expect to test on a schedule set by your state, and to protect the wellhead from contamination. If you use municipal water, keep a copy of the utility's quality reports. Test again after repairs, floods or any change in treatment. Ask your dairy regulator what tests and frequencies apply. Hardness, iron and chlorine levels also affect cleaning performance and equipment life, so know your numbers.

Map where water goes

Walk through the plant and list every water use: product ingredients, cooling, boilers, clean-in-place, hand washing, floor washing, truck washing and sanitation. Put meters on the biggest ones if you can. Divide by pounds of milk processed to get a use rate you can track. Plants often discover that floor hosing and continuous-running hoses use more than anyone guessed. Put nozzles with shutoffs on every hose. A running hose is a very efficient way to pay twice, once for the water and once for the sewer.

Tighten up cleaning

Cleaning typically uses most of the water in a plant. Pre-rinse and scrape equipment before the wash to cut chemical load. Follow your equipment supplier's CIP programs for temperature, time and concentration, and verify them with test strips or titration. Reuse final rinse water for pre-rinse where your regulator allows it. Never reuse water that touches product without approval. Cooling water that never touches product may be reusable for other tasks. Document each change and its effect.

Handle wastewater properly

Wash water carries fats, proteins, sugars and sanitizers. Municipal sewer users may need a permit or pretreatment, and charges often rise with strength. On-site disposal is regulated by state environmental agencies. Install screens and fat traps, keep milk out of drains by catching spills, and keep pH within the limits your discharge permit sets. Talk to your environmental agency before building. The NRCS conservation resources and farmers.gov conservation page are useful if land application is a possibility.

Watch drought and supply risks

If your area has water restrictions or drought, plan for it. The U.S. Drought Monitor and Drought.gov show current conditions in your region. Know your well's capacity and have a backup plan for outages, including how you would clean and sanitize if water were limited. Ask your regulator what is allowed in an emergency. Water efficiency is one of the cheaper projects you can do, and it pays more when supplies are tight.