What's the best way to store commodities?

Keep it dry, covered and watched

DODGE CITY, Kansas — The best way to store commodity feeds is to keep them dry, covered, clean and checked often, and to match the storage method to the feed. Dry grains and pellets keep well in sealed bins or dry sheds. Wet byproducts spoil quickly and need fast feeding or packing. In every case, moisture is the enemy, and the cost of a spoiled load is worse than the cost of better storage.

Commodities include corn, soy products, cottonseed, distillers grains, gluten feed, beet pulp, hulls and other purchased ingredients. Each behaves differently, so storage should follow the product.

Dry commodities: bins and sheds

Dry grains and meals store best in clean, dry bins with tight lids and good aeration or airflow. Before filling, clean out old feed, because leftovers harbor insects and mold. Check roofs, seals and sidewalls for leaks. Keep grain at a moisture level safe for the storage time, and cool it as the weather changes, since temperature swings can cause condensation and moldy spots.

Check bins regularly. Look and smell for musty odors, crusted grain or insects. Probe and sample if you can. Grain that's stored long needs more attention than grain that turns over fast. State extension resources, such as University of Nebraska Extension, Purdue Extension and Kansas State Research and Extension, publish stored-grain management guidance with moisture and temperature recommendations.

Wet byproducts and bunkers

Wet byproducts like wet distillers grains or wet gluten feed have high moisture and spoil in a short time, especially in warm weather. They're often stored in a bunker, pile or bag, and some farms mix them with dry feeds to extend their life. Follow the supplier's and extension's guidance on how long a given product keeps, and plan deliveries so you don't hold more than you can feed.

Pack the pile, cover it, and keep the face clean. Many farms buy only what they can feed before it deteriorates, even if a bigger load is cheaper per ton. A cheap load that goes bad isn't cheap.

Pests, mold and mycotoxins

Pests such as rodents, birds and insects damage feed and carry disease. Keep storage areas clean, seal gaps, remove spilled feed and monitor traps. Insects can build up in warm grain, so inspect it regularly.

Moldy feed can contain mycotoxins that harm animal health, reduce intake and cut milk. If you see mold, a sour or musty smell or clumping, don't feed the questionable material until you've talked with your vet and nutritionist. Testing can help, and the veterinary and extension communities can recommend labs. Don't dilute bad feed and hope; some toxins don't dilute away.

Safety around bins and bunkers

Stored grain can be dangerous to people. Entering a bin, especially when grain is crusted or flowing, can lead to entrapment, and dust and gases cause their own risks. Never enter a bin without proper procedures, a harness, a second person and the power off. The OSHA agriculture page and the NIOSH agriculture program have safety information on grain handling. Silage and feed piles also have hazards, including face collapse, so keep people and equipment from standing under overhangs.

Inventory and rotation

Rotate stock so older feed gets used first. Date deliveries, and keep simple inventory records. Know how much you've got, how fast you use it and when you need to reorder. Buying ahead can save money, but only if you can store it well, and the savings disappear if shrink eats them.

Insurance is also worth a look. Ask your agent whether stored feed is covered, and for what causes. Fire, wind and water losses are treated differently from spoilage, and many policies exclude gradual deterioration entirely, so a moldy bin may be your problem alone.

Finally, keep a simple log for each bin or bunker: what went in, when, its moisture, and every check you made. If a problem shows up later, that log tells you whether it started at delivery, in storage or at the feed-out, and it gives the supplier or insurer something concrete to look at.

  1. Match storage to the feed's moisture and shelf life.
  2. Clean bins and sheds before filling.
  3. Fix leaks and seal gaps.
  4. Monitor temperature, moisture and odor regularly.
  5. Control pests.
  6. Use first-in, first-out rotation.
  7. Follow bin safety rules.
  8. Talk to your vet if anything looks or smells wrong.

Good storage is mostly housekeeping, and the payback shows up as feed that's still feed when the cows get to it.