What is the best way to test manure nutrients?

Use a lab, and sample like it matters

WAUSAU, Wisconsin — The best way to test manure nutrients is to send a properly collected, representative sample to a lab that does manure analysis, and ask for the tests you'll need for application decisions: total nitrogen, ammonium nitrogen, phosphorus, potassium and dry matter, plus anything your state requires. Quick on-farm tools exist and have a place, but a lab test is the standard for planning.

Manure content swings with feed, bedding, storage and handling, which is why book values can be way off. Here's how to get numbers you can trust.

Choose a lab and ask what it offers

Look for a laboratory that analyzes manure and follows recognized methods. Many land-grant universities and state agencies list certified labs, and some states run certification or proficiency programs. Ask your extension office for recommendations. A soil lab that doesn't regularly handle manure may not give good results.

Ask the lab which package fits your goals. A basic test usually includes dry matter, total nitrogen, ammonium nitrogen, phosphorus and potassium. Add secondary nutrients, micronutrients, salts, pH or organic matter if you need them, such as for compost or fields sensitive to salts. Ask about turnaround, sample container requirements and how to ship. Some labs give sample bottles with instructions.

Nutrient Stewardship and your extension office have background on testing and interpreting results.

Collect a representative sample

A bad sample makes the best lab useless. Manure in a pit or pile isn't uniform. Liquid manure layers, with solids settling and a crust forming on top. Solid manure varies from the center of a pile to the edges.

Take multiple subsamples and combine them. For liquid manure, agitate before and during pumping, then collect samples during load-out from several points. For solid manure, collect from various spots and depths in the pile or from several spreader loads. Mix thoroughly and fill the lab container, leaving headspace in bottles for liquid samples, because gases can build as they sit. Follow your lab's rules on freezing or cooling. The details of collecting are covered in a separate guide for sampling technique, so check that if you're setting up your procedure.

Safety matters. Manure pits and storages can have deadly gases. Never enter a pit, and use proper sampling tools from outside. The CDC's NIOSH agriculture program has safety information on manure gas hazards.

Interpret the results correctly

Reports come in different units and bases. Dry basis means the nutrient content of the dry matter. As-is or wet basis is what's in the manure as it comes out of the storage, and that's the number you need for calculating field rates. Know which one you're reading. Many a mix-up has come from mixing the two.

Remember that only part of the nitrogen is available the first year. The ammonium fraction acts quickly, but it's also lost most easily to air if left on the surface. Organic nitrogen mineralizes slowly. Phosphorus and potassium are generally treated as available, although your state may use specific availability percentages.

Take the numbers to your nutrient plan or crop adviser. A certified crop adviser can help use the results. You can find advisers through the Certified Crop Adviser program.

Quick tests and when they help

On-farm tools, like hydrometers, conductivity meters and quick-test nitrogen kits, give fast estimates. They're helpful for day-to-day checks, especially to see how manure content changes from load to load, and for adjusting when you can't wait for a lab report. Treat them as estimates, and compare them against lab results to learn how well they track on your farm.

Their accuracy varies with manure type, and they work better for some nutrients than others. Calibrate them against lab results at least once, and don't use them in place of lab tests in a regulated plan.

Test often enough to catch change

A single test gives a starting point, but manure changes. Test at least once a year, and again when you change feed, bedding, storage or animal groups. Some states require annual testing for permitted operations, and some farms test every load on large systems.

Keep a record of results over several years. You'll see ranges, and you can pick average values for planning while still testing regularly. Sampling the same way each time makes comparisons meaningful.

The short version

Use a manure-capable lab, sample from many spots, report on a clear basis, and retest when something changes. Sending a sample costs little compared to the fertilizer you save and the trouble you avoid. A good sample is the cheapest insurance in the barn.