What is the best way to test protein?
Lab methods, and why labels matter
AMES, Iowa — For milk, the best protein test is the one your buyer or testing lab already uses: usually a mid-infrared analyzer calibrated against a reference chemistry method. For feed and forage, protein is tested by a lab using combustion or digestion methods that measure nitrogen. There isn't a good barn-side way to do it accurately, so the useful question isn't "how do I test it" but "which result am I looking at, and what does it mean?"
Milk protein: true versus crude
Milk contains true protein (caseins and whey proteins) and a bit of non-protein nitrogen, like urea. Crude protein counts all the nitrogen as if it were protein, and true protein counts only the real thing. Infrared instruments are calibrated to report one or the other, and your statement may say which. Some buyers pay on true protein and others on crude, and the difference can matter when you compare numbers from different sources. Ask your field rep which one applies to your milk check. If your herd test report shows a different protein than your plant report, that's often the reason, not a lab error. The AMS dairy pages describe how components enter federal pricing.
The reference methods behind the machines
Kjeldahl is the long-standing reference method: the sample is digested in acid, the nitrogen is released and measured, and a conversion factor turns nitrogen into protein. The Dumas method burns the sample and measures nitrogen gas, which is faster and avoids some hazardous chemicals. Labs use these to calibrate infrared instruments. You don't need to run them yourself, and most farms never will, but it helps to know that a trustworthy infrared result traces back to one of them.
Testing feeds and forages
If your real question is about ration protein, send forage and feed samples to a certified lab. Labs report crude protein, and often fractions like soluble protein and protein bound to fiber, which tell you how available the protein will be to the cow. Near-infrared analysis is common for forage because it's quick and inexpensive. Wet chemistry gives a more careful number when you're formulating around a tight ration. Collect the sample from several spots in the pile or bale lot, mix, and subsample. A single handful of the best-looking hay will flatter your numbers and embarrass your nutritionist.
Why milk protein moves
Milk protein responds slowly to management, which is why it frustrates people. Energy intake, amino acid supply, genetics, stage of lactation and heat stress all play a role. A sudden dip often points to an energy shortfall, a feed change, or a sick group. A gradual slide may be about genetics or sustained under-feeding of fermentable carbohydrate. Work with a nutritionist, and see if your state's extension has dairy nutrition guidance. Iowa State's Ag Decision Maker and Penn State Extension are reasonable places to read further.
A short checklist before you trust a number
- Check whether it's true or crude protein.
- Confirm the sample was mixed and preserved properly.
- Compare against your own herd's trend, not a neighbor's.
- Look at the lab's report for method notes.
- Re-test if the value looks off, using a fresh sample.
When results seem wrong, ask the lab how often it checks its instruments and whether it takes part in proficiency testing. Good labs don't mind the question.
Protein is stubborn and slow. Pick a lab you trust, stay consistent with sampling, and judge the herd by trend lines rather than one weird Tuesday.