Which bacteria tests matter most?

Counts that point to causes

WOOSTER, Ohio — Four bacteria counts do most of the work on a dairy farm: standard plate count, preliminary incubation count, laboratory pasteurized count, and coliform count. Each one points at a different weak spot, so reading them together tells you whether the problem is dirty cows, dirty equipment, poor cooling or something else.

Your buyer may run some of these on every load, and a certified lab can run any of them on your own sample. Know what each one means before you chase a fix.

Standard plate count

The standard plate count (SPC), sometimes reported as total bacteria count, estimates the number of live bacteria in a milliliter of raw milk that grow under set lab conditions. It's your all-purpose measure of sanitation and cooling. A high result means bacteria got in, grew, or both. It doesn't say which species, but it narrows the search to hygiene, equipment or temperature.

Preliminary incubation count

For the preliminary incubation (PI) count, the lab holds the sample cold-ish for a set period before counting. Bacteria that grow at low temperature multiply, so a high PI count suggests poor cooling or long storage, or a population of cold-loving bacteria taking hold. If SPC is fine but PI is high, look at cooling speed and tank temperature first.

Laboratory pasteurized count

The laboratory pasteurized count (LPC) heats the sample first, which kills most bacteria and leaves heat-tolerant ones. A high LPC usually points to dirty or milkstone-coated equipment where thermoduric bacteria survive the wash. Check wash temperature, detergent strength, water hardness, and worn rubber parts that can hold biofilm.

Coliform count

Coliforms such as E. coli and Klebsiella live in manure and wet bedding. A high count suggests dirty teats, poor pre-milking prep, contaminated wash water or contaminated equipment. Treat it as a hygiene signal about the cow environment.

Mastitis organisms and special tests

If cell counts are high, culture or PCR testing of cow or bulk tank samples can name the organism: Strep ag, Staph aureus, Mycoplasma or others. Bulk tank culture is a cheap screen for contagious pathogens, though a negative result doesn't prove the herd is clear, since shedding is intermittent.

How to use the results

  1. Collect the last several reports and chart each count by date.
  2. Compare patterns: SPC high alone, PI high alone, LPC high alone, or all together.
  3. Match to the cause above, check the suspected area, change one thing, and re-test.
  4. Keep samples sterile, cold and delivered promptly, since a warm sample grows bacteria in the vial and skews results.

Rules and limits for bacteria counts depend on your state and market, so confirm the current requirements with your state dairy regulator and your milk buyer. The National Mastitis Council covers mastitis culture and bulk tank testing. Extension and UW farm extension offer milk quality troubleshooting guides, and the USDA Agricultural Marketing Service explains federal milk programs.

Don't let a single odd result send you tearing out the pipeline. One high count is a question; three in a row is an answer.