Which benchmarks measure manure efficiency?

Numbers that show manure working

ROCHESTER, Minnesota — Manure efficiency isn't one number. It's a handful of benchmarks that together show whether the nutrients you handle end up in crops instead of in the air, the ditch or the pit bottom. The useful ones are nutrient use efficiency (how much of what you applied the crop took up), a farm nutrient balance (what comes in versus what leaves), fertilizer offset (how much purchased fertilizer manure replaced), and cost per unit of nutrient applied. Here's what each tells you and how to start tracking it.

Nutrient balance on the whole farm

The broadest benchmark is a farm-gate balance: nutrients entering the farm as feed, fertilizer, animals and bedding, minus nutrients leaving as milk, meat, crops and manure sold. A big surplus of nitrogen or phosphorus means something is accumulating in soil or leaving through water and air. A balance near zero on phosphorus suggests you're not building up soil levels.

You don't need fancy software. Feed invoices with feed analyses, fertilizer purchases and sales records get you most of the way. Some extension programs offer worksheets for this. Look for tools from land-grant universities, such as those at the University of Minnesota Center for Farm Financial Management and your state extension service, and check which balance method they use so you can compare year to year.

Field-level nutrient use efficiency

Per-field efficiency compares nutrients removed in the harvested crop with nutrients applied from all sources. If you applied a certain amount of phosphate and the crop removed far less, the difference goes to soil storage or loss. Partial nutrient balance and removal-to-application ratios are common ways to express this.

Crop removal numbers by yield are published by extension and by NRCS. Pair them with your yield records and your application records. Over several years, a field that keeps getting more phosphorus than the crop removes will show rising soil test levels, which is your confirmation. A field where nitrogen applied is far higher than crop uptake might merit a check for loss pathways, like leaching on tile-drained ground. A soil test every few years is the cheap proof.

Fertilizer offset

For many farms, the most practical efficiency measure is how much commercial fertilizer manure displaced. Track purchased nitrogen, phosphate and potash per acre on manured fields compared to similar fields without manure, or compared to the recommendation before the manure credit. If your manured corn fields still get the full fertilizer rate, either you aren't crediting the manure or you don't trust the analysis. Both are worth fixing.

Offset is also easy to explain to a banker or landlord. It shows up in the fertilizer line of the budget. Compare to the recommendation from your soil test, and note yields so you can see that reduced purchases didn't cost bushels. If yields hold, the manure program is paying.

Application accuracy

Efficiency falls apart if the rate on the field isn't the rate in the plan. Benchmarks here include calibration results (actual versus target rate), uniformity across the swath, and the share of loads sampled and analyzed. If your spreader delivers a wide spread in rate across the width, some of the field gets too much and some too little. Many extension offices and equipment dealers can help check uniformity with catch pans.

Track the percentage of acres where you used a measured rate instead of an estimate. That may sound dull, but it's the benchmark that makes the others trustworthy. The NRCS conservation practice standards describe what a nutrient management plan expects for rate and records.

Environmental and soil indicators

Finally, check the results in the soil and water. Soil test phosphorus trend, soil organic matter, late-spring nitrate tests where recommended, and edge-of-field or tile water sampling if you or a watershed group do it. Some states use a phosphorus index to rate field risk, which ranks fields by source and transport factors and is a benchmark you can track over time.

None of these is a verdict alone. Taken together, they tell a story. Benchmarks for dairy and livestock nutrient use from industry groups, like those at Innovation Center for U.S. Dairy, can give you a sense of where others are heading, though your own trend line matters more than a comparison with someone on different soils. Pick three benchmarks, measure them for two seasons, and decide from there what to change. A manure program that you can describe in numbers is a program you can improve.