Which cheese knives work best?
Match the blade to the cheese
GRUYERES, Vermont — The cheese knives that work best are the ones matched to the cheese: a long, thin wire or a wide, sharp blade for fresh and soft cheeses, a sturdy knife with holes or a heavy blade for semi-hard cheeses, and a strong chisel-shaped tool or a wire for hard aged wheels. There's no single best knife. A cheese shop and a cheese plant will each end up with a small collection.
Soft and fresh cheeses
Soft cheeses stick to blades. A thin wire, or a knife with holes in the blade to reduce suction, cuts them cleanly. A long, thin-bladed knife dipped in hot water and wiped between cuts works for many. Avoid serrated blades that tear the rind and leave crumbs.
Semi-hard cheeses
Semi-hard cheeses like many farmstead styles cut well with a knife with a sharp, heavy blade and holes or a slight offset handle. A cheese wire stretched on a frame gives even slices for retail pieces. A sturdy handle matters: you'll push through a lot of cheese in a day.
Hard and aged cheeses
Hard cheeses require force. Use a short, strong blade, a spade-shaped cheese knife, or a chisel-style knife that splits cheese along its natural grain. A sharp, wide blade works for cutting wedges, with a rocking motion and pressure from the top. For large wheels, a wire cutter or a heavy cleaver-style knife on a stable board gives control. Keep fingers well away from the blade path.
Material, handles and care
- Stainless steel blades resist corrosion and clean easily.
- Handles should be non-porous, so avoid raw wood in a licensed plant. Ask your inspector about acceptable materials.
- Color-coded handles help you keep tools separate for raw and finished product, or for different allergens.
Wash tools in warm water with detergent, rinse, and sanitize. Sharpen blades or replace them when they dull, since a dull knife slips. Dry knives and store them where they won't bang into each other. The OSHA agriculture page has general safety information, and the FSIS provides food safety guidance.
Separate tools for aged and fresh cheeses
Use separate knives for different cheeses, or wash between uses, to avoid cross-contamination of molds, flavors and allergens. This matters especially in aging rooms, where a knife that touched a blue cheese shouldn't touch a clean cheddar. Keep a labeled set for each area.
Test before buying in bulk
Buy one or two of a style and try them on your cheese. Slice your usual products, watch for tearing, sticking or crumbling, and ask your crew which feel best. A knife that feels fine for ten minutes may hurt your wrist after an hour. The USDA AMS local and regional programs and Cornell Small Farms may also have useful training for farm-based cheese operations.
Care for the edge
A sharp knife is safer than a dull one because it takes less force and slips less. Hone or sharpen on a schedule, and never use cheese knives for anything but cheese. Wash by hand when the maker recommends it, because dishwashers dull blades and can loosen handles. Dry the blade and store it in a sheath, a rack or a block, never loose in a drawer.
Cutting boards and surfaces
A knife is only half of the setup. Use a stable, non-porous surface that can be cleaned and sanitized, and use separate boards for different products. Keep the board from sliding with a damp cloth underneath. A steady board and a sharp blade give cleaner cuts than any fancy knife.
Think about how the cheese is sold
If you cut for retail, your knives and cutting setup may be reviewed during inspection, and your labels and weights matter too. Ask your regulator what rules apply to cutting and wrapping cheese for sale. Many states have specific requirements for cut-and-wrap rooms, and it's much easier to plan for them than to rebuild later. A short talk with your inspector before you set up the cutting area saves a lot of money.
The right knife makes cutting a dull task. The wrong one makes it a story.