Which cheese waxes are food safe?

Use wax made for cheese, nothing else

TULSA, Oklahoma — The food-safe choice is wax sold specifically for coating cheese, which is a blend formulated to stay flexible, stick to the rind, and meet food contact standards. Don't use candle wax, craft paraffin, or wax from unknown sources, since they may contain additives, dyes, or scents not meant for food. Buy from a dairy supplier, read the label, and follow its melting and application directions. Wax protects hard cheese from drying out and from mold, but it isn't right for every style.

What cheese wax is

Cheese wax is typically a blend of waxes and sometimes a microcrystalline component and other additives that make it pliable and less brittle than plain paraffin. It comes in colors like red, yellow, black, and clear. Colors are for identification and appearance, and a legitimate product will say it's for food contact or cheese use.

What to avoid

If you can't confirm that a wax is intended for food and cheese, skip it.

Which cheeses to wax

Hard and semi-hard cheeses that age for months, such as cheddar, gouda, and similar types, are the usual candidates. Waxing keeps moisture in, stops rind mold, and makes cheeses easy to store. Soft, bloomy, washed rind, and blue cheeses need to breathe and generally shouldn't be waxed.

How to apply it

  1. Dry the cheese until the rind is clean and completely dry.
  2. Melt wax gently in a double boiler, never over direct flame, since wax is flammable.
  3. Dip or brush on a thin, even coat, covering every spot, then add a second coat.
  4. Check for pinholes, since gaps let in air and mold.
  5. Label the cheese with date and type, using paper under the wax or a tag.

Heat wax carefully and keep it away from water splashes and open flame. Wear heat-safe gloves.

Alternatives to wax

Vacuum sealing, cheese paper, cloth with lard, and natural rinds all work for specific styles. Each affects ripening differently. Wax stops most gas and moisture exchange, so it suits cheese that you want to age slowly and quietly.

Reusing wax

Some makers remelt and strain wax, but any contamination can transfer mold. If you reuse it, filter and heat it, and discard any that was in contact with moldy cheese.

Waxing tips that help

Keep the wax hot enough to flow thinly. Wax that's too cool goes on thick and lumpy, and it can crack later. Wax that's too hot can warm the cheese and cause the surface to sweat. Dip the cheese quickly, let it drain, and use a brush to patch gaps. Hold the cheese by a clean cloth, not bare fingers, so oils and moisture don't affect adhesion.

When wax goes wrong

If wax cracks, mold can sneak in. Remove damaged wax, clean the spot, and re-wax it. If you see mold under wax, the cheese was not dry enough when coated, or a pinhole let in air. Small mold spots on a hard waxed cheese can be dealt with carefully, but follow safe food handling guidance and discard anything questionable. Keep wax away from drains, since it can clog pipes as it cools.

Storing wax and tools

Keep wax in a clean, covered container, away from dust and heat. Use a dedicated pot, since cleaning wax from a cooking pot is a hassle and a hazard. Label it so nobody uses it for soup. Keep a small brush just for wax and replace it when bristles start to shed.

Where to check rules and learn more

If you sell waxed cheese, your state agriculture department can tell you about labeling and food-contact requirements. eXtension, Cornell small farms, and Penn State Extension have farmstead dairy materials, and the USDA Food Safety and Inspection Service covers general food safety.

Buy wax from a cheese supplier. Your candle drawer is not part of the dairy.