Which cheeses need turning during aging?
Turn the wet ones most
SUSSEX, Wisconsin — Most natural-rind, bloomy-rind, washed-rind and blue cheeses need turning during aging, and the softer and wetter the cheese, the more often you flip it. Turning keeps moisture from sinking to the bottom, helps the rind form evenly, and stops wheels from sticking to the shelf. Cheeses that are waxed or vacuum-sealed need far less turning, since they have little surface moisture shifting around. A fresh cheese that never ages, like ricotta, needs none. The practical question is how often, and that depends on moisture, size and the room.
Why turning matters
Gravity pulls moisture toward the bottom of a wheel. If you don't turn it, the bottom stays wet and the top dries, which can lead to uneven texture, a slimy base and cracked top. Turning also keeps the rind from fusing to the board or mat, and spreads the surface moisture so mold or bacteria grow evenly.
Cheeses that need regular turning
- Bloomy rinds (Brie, Camembert styles): often turned every day or two in the early weeks.
- Washed rinds: turned during each wash, so often every few days.
- Natural-rind wheels: such as many tomme and mountain styles, turned regularly, often daily at first and then weekly.
- Blue cheeses: turned often early on to help even drainage and mold growth.
- Large aged wheels: like Gruyere styles and big cheddars aged naturally, turned weekly or so.
These are rough patterns. Use your recipe's schedule.
Cheeses that need little or no turning
Waxed and vacuum-bagged cheeses usually need no turning, or only an occasional flip. A well-sealed block isn't losing moisture to the air the same way a natural-rind wheel is.
Very dry, hard cheeses with thick rinds, once established, may need turning only every week or two. Fresh cheeses, like chevre, don't age and need no turning. Cheeses in brine, like feta, don't need it either.
How to turn without making a mess
Wash your hands or wear gloves. Flip the wheel gently, don't drag it. Wipe the mat, board or shelf underneath so you don't carry grime to the next wheel. For soft cheeses, use a flat paddle or a clean hand under the base, and don't press fingers into the paste.
Mark the top of each wheel with a note on the shelf or a log sheet so you know when it was last turned. Rotate shelf positions too, since the ends of a shelf are often drier or cooler.
Turning big wheels safely
Large wheels are heavy and awkward. Use two people or a lift when you need to, and keep your back out of it. A slipped wheel damages the rind and may hurt you. Wear closed shoes in the cave, and keep floors dry.
For very large wheels, build a simple turning routine with a clean table or cart at shelf height, so you slide instead of lift. Brush off the rind as you go and check for cracks.
OSHA publishes safety material for agricultural work, and it's worth reading if you have employees. Back injuries are common in cheese rooms, and a good routine prevents most of them. Start at the OSHA agriculture page.
Turning logs and labels
A clipboard hung beside the shelves works well. List each batch, shelf position and the date of each turn, then tick off as you go. Label wheels with a make date, since two wheels from different days can look the same on a shelf. In a busy week, the log is what keeps you from turning one wheel three times and another not at all.
Make a simple schedule
Write a chart with each cheese's type, make date, turning frequency and notes. Taper turning as the rind sets. When in doubt, look at the bottom. If it's wet or slimy, turn more often. If it's dry and stuck, you may be too dry.
For help with aging and facilities, see Penn State Extension, the University of Wisconsin farm resources and Cornell Small Farms. For regulatory guidance on sale, check the USDA Food Safety and Inspection Service.
If you skip one day, the cheese forgives you. If you skip a week, it won't.