Which detergents suit dairy cleaning?

Alkaline for soil, acid for minerals

EAU CLAIRE, Wisconsin — The detergents that suit dairy cleaning are alkaline, chlorinated alkaline cleaners for milk fat and protein, with an acid cleaner used periodically to remove mineral deposits. Which product is best depends on your water hardness, equipment materials and whether you clean by hand or by circulation. A single detergent rarely does everything.

Alkaline detergents

Alkaline cleaners dissolve fat and protein. Many pipeline cleaners also contain chlorine to help break down protein. Hand-wash versions are gentler on skin. Use products designed for dairy, and follow label concentration and temperature. Too strong a solution can damage rubber and aluminum, and too weak leaves soil behind.

Acid detergents

Acid cleaners remove milkstone and mineral scale, which form when milk minerals and hard water leave films on surfaces. Phosphoric, nitric and other acids are common, per the supplier. Acids are used on a schedule, not necessarily every wash. Never mix acid with chlorine products.

Water matters

Hard water leaves deposits and reduces detergent action. Soft water or conditioned water may help. Ask your chemical supplier to test your water for hardness, iron and pH, and choose a product with the right conditioners. Poor water quality is a common reason a good detergent seems to fail.

Match the product to the job

  1. Milking pipelines and tanks: dairy-specific circulation cleaners.
  2. Cheese vats and tables: manual or CIP alkaline cleaner, with periodic acid.
  3. Hand tools and molds: mild alkaline hand-wash detergent, with the right rinse.
  4. Aluminum parts: check compatibility, since strong alkalis damage aluminum.

Check the label and the supplier

Read concentration, temperature, contact time and compatibility. Choose products designed for food-contact equipment. Ask the supplier for a written wash program, a water test and training for your crew. A good supplier will visit and check your system, not just deliver jugs. The EPA pesticide page covers regulation of sanitizers, which are different from detergents but are used afterward.

Safety

Detergents can burn skin and eyes. Use gloves, goggles and ventilation. Keep safety data sheets handy, label all containers and store chemicals away from feed and each other. The OSHA agriculture page provides safety guidance.

Check results

Look for film, cloudiness or odor on equipment. Track bacteria counts. If problems show up, review water temperature, concentration and time before switching products. eXtension and the National Mastitis Council offer additional dairy cleaning resources.

Dosing, mixing and storage

Detergent works only at the right strength, so measure. Use a dispenser or measuring cup instead of pouring by eye, and check strength with titration kits or test strips from your supplier. Mix in the order the label states, add chemicals to water and not water to chemicals, and never combine different products. Keep containers closed and labeled, away from freezing and heat, since some products separate or lose strength if stored badly.

Hand wash versus circulation products

Circulation cleaners are made to work in closed systems without foaming. Foaming products can cause trouble with pumps and air gaps. Hand-wash detergents are meant for brushes and sinks. Use each product where it's intended. If you aren't sure, ask the supplier, and ask for written instructions you can post.

Review the program once a year

Water quality, equipment and products change. Once a year, ask your supplier to look at your whole cleaning program, including concentrations, times, temperatures and water test results. Compare costs against results, and don't switch products just for price without checking performance.

Ask about residues and rinsing

Detergent that doesn't rinse clean leaves a film, and that film shields bacteria and can taint milk or interfere with cultures. Ask your supplier how many rinse cycles are needed and how to test for leftover detergent, for example with a pH check of the final rinse water. If the final rinse isn't close to your incoming water pH, rinse more. It's a cheap check, and it catches problems before they reach the product.

A good detergent in the wrong concentration is a bad detergent. Measure, don't guess.