Which milking equipment suits small ruminants?

Match the gear to the herd size

BOISE, Idaho — Equipment for small ruminants ranges from a bucket and a milking stand to a full pipeline parlor with a bulk tank, and the right choice depends on how many animals you milk, how you sell the milk and how much labor you have. Goats and sheep need equipment sized for them: smaller claws, lower vacuum levels and pulsation settings appropriate to the species. A cow unit set up as-is can hurt a doe or ewe. Here's how to match gear to scale.

Start with the stand or platform

Even the smallest dairy needs a way to hold animals at a good height. A single stand with a headgate and feed pan works for a handful of does. For larger flocks, a raised platform with several stalls lets animals enter, eat and leave in groups, and puts the udder at a level that spares your back.

Choose a surface that's easy to clean and doesn't get slippery, like sealed wood, metal or plastic. Add light and a way to drain wash water. Many small dairies start with a stand and outgrow it. If you think you'll grow, ask a builder or dealer about layouts that can be extended.

Hand, bucket and portable machines

For a very small herd, hand milking into a stainless pail is inexpensive and simple. Hand milking can work for one or two animals but becomes a labor problem fast as numbers grow.

A bucket milker is the usual first machine. A portable unit with a vacuum pump, a pulsator, a bucket and a cluster sized for goats or sheep milks a couple of animals at a time and moves where you need it. It's easy to clean and cheap relative to a pipeline. The downside is lifting and carrying milk, and every pour is a chance for contamination. Many beginners find this stage is worth staying at for a while.

Pipeline and parlor systems

Once you reach a moderate herd size, a pipeline system carries milk through stainless lines to a receiver or bulk tank, which saves labor and reduces handling. Parlors for small ruminants are usually a raised platform with stalls on one or both sides, often with the animals in a line and the milker working from a pit or at floor level.

Ask dealers for equipment designed for goats and sheep and for a design that fits your herd and facility. Get the vacuum and pulsation settings for your species in writing, and have the system tested by a qualified technician. Plan for wash systems, hot water supply and drains. Extension programs and the National Mastitis Council publish information on milking machines and milking routine that applies across species. Check with your state dairy regulator before buying anything, because some states require specific approvals for equipment used in licensed dairies.

Cooling, storage and cleaning

Fast cooling is the most important thing you do after milking. Options include an ice bath for small amounts, a refrigerator or chest freezer, a plate cooler, and a bulk tank for larger volumes. Your state's regulations may specify temperatures and times, so ask your regulator what's required for your sales channel.

Cleaning equipment matters as much as the milking gear. A basic set includes brushes, a sink with hot water, dairy detergent and sanitizer, and a place to air dry equipment. Larger systems use a clean-in-place setup. Store parts off the floor in a clean place. Keep a spare set of liners, gaskets and other wearing parts on hand, since they wear out at the worst time.

Maintenance and testing

Milking machines wear. Liners lose elasticity, pulsators drift, and vacuum regulators clog. Follow the manufacturer's schedule for liner replacement and have the system serviced and tested regularly. A vacuum that's too high or too low, or poor pulsation, can contribute to teat-end damage and mastitis.

Keep a log of service dates and parts changed. If somebody asks, you can show them. When buying used equipment, ask about its history and have a technician inspect it, because a cheap machine with worn parts and no records isn't a bargain.

Budget in steps

Start with what you can afford and grow into the rest. For many farms, a good stand, a bucket milker, simple cooling and a diligent wash routine is enough for the first years. Consider beginning farmer resources for training and loans, and plan the next step before you outgrow the current one. Cornell's small farms program and similar extension programs can help you compare options. Buying equipment last, after you've settled your market and your herd size, saves you from owning a lot of machinery for the wrong flock.