Which mold cultures are safe for cheese?

Know the good molds from the bad

BURLINGTON, Vermont — The safe molds for cheese are the ones sold as cheese cultures for that purpose: Penicillium candidum (also labeled Penicillium camemberti) for bloomy rinds, Penicillium roqueforti for blues, and Geotrichum candidum for wrinkled, creamy rinds. Washed-rind cheeses use bacteria and yeasts instead, mainly Brevibacterium linens and related surface flora. What isn't safe is any mold that simply shows up. If you didn't add it and can't name it, treat it as a contaminant, because wild molds can produce toxins that no recipe is worth risking.

Why purchased cultures matter

Commercial cultures come from strains that have been used in cheese for a very long time and are selected for flavor, color and, importantly, low toxin potential. A scoop from the back of the fridge or a scraping from a fancy cheese rind carries unknown strains, plus whatever else rode along. Buy from a cheesemaking supplier, check that the product is a food-grade dairy culture, and follow the storage directions on the packet. Many are kept frozen or refrigerated, and a culture that sat in a hot truck may be dead. Dead culture means a wheel that has no mold, so it gets taken over by whatever is floating around your cellar.

The mold you add on purpose

What unwanted growth looks like

Safe cheese molds tend to look consistent: white, bluish-green in the interior of blues, or orange on washed rinds. Be suspicious of black or dark grey fuzz, bright pink or red patches on a bloomy cheese, thick yellow fur, and anything that smells like a damp basement. Cheese mites can also show up on aged rinds as fine dust that moves. Surface contamination on a hard, dry aged cheese can sometimes be cut away generously, but soft and fresh cheeses should not get that benefit of the doubt. Wet cheese lets mold threads spread farther than you can see. When in doubt, throw it out and keep your good cultures separate from your sourdough starter and your vegetable ferments.

Keeping the cellar clean

Cross-contamination ruins more batches than bad luck. Keep blue cheese in a separate container or fridge from bloomy cheeses, because blue spores spread easily and will colonize a brie wheel. Wash and sanitize tools, boards and racks. Use dedicated knives. Keep the ripening space at the humidity and temperature the recipe calls for, since the wrong conditions favor the wrong organisms.

Safety and licensing

Mold safety is only one piece of cheese safety. Milk quality, pasteurization or aging rules, and handling all matter more for pathogens than the mold choice. The USDA National Agricultural Library and Penn State Extension are good starting places for dairy food safety information. If you sell cheese, your state agriculture department sets the licensing and inspection rules, and the National Agricultural Law Center can point you to legal background.

Questions to ask your supplier

When you buy a culture, ask a few plain questions. Is the strain intended for the cheese style you are making? What is the storage temperature and shelf life once opened? Does the packet give a dose for your batch size, and is there a lot number you can write down? A good supplier answers these without fuss. Keep the lot number with your make sheet so that if a batch goes wrong, you can tell whether the culture or the process was the cause. Never reuse a culture by scraping it off a finished rind unless an experienced maker is walking you through it, since that is how stray molds and bacteria hitch a ride into the next batch.

Buy fresh culture, store it as directed, keep your spaces separate and learn what a healthy rind looks like in your own cellar. After a few batches you'll spot the difference from across the room.