Which presses suit small batches?
Spring, weight and screw designs compared
FAYETTEVILLE, Arkansas — For small batches, the presses that suit best are a simple weight-driven press, a spring-loaded press with a pressure gauge, or a small screw or lever press, each paired with molds sized to your batch. Pick based on how many pounds of cheese you make at once, how much pressure your recipes call for, how often you press and how much you want to spend. A one- or two-gallon batch has very different needs from a twenty-gallon vat.
Weight-driven presses
The simplest design uses a mold, a follower and a stack of weights, or a frame with a lever arm that carries a hanging weight. Pressure is easy to read because you know the weight. Weights don't wear out, and there are no springs or gauges to calibrate. The downside is bulk. A set of weights takes space, and a lever press needs a stable frame. This is a good choice for makers who like predictable, repeatable pressing.
Spring-loaded presses
Spring presses compress a spring as you turn a screw or knob, and many have a gauge that shows pressure. They're compact and good for kitchens, and they handle many small molds. The weakness is that the spring can lose accuracy over time and the pressure may drift as the cheese compresses. Check the gauge against a known weight now and then. Look for stainless steel parts and food-safe plastics.
Screw and lever presses
A screw press applies pressure by turning a handle. It's compact and powerful but harder to control precisely, so it needs a gauge or a careful touch. A lever press multiplies a hanging weight and can reach higher pressures with less weight, which helps if you press larger wheels. Both need to be sturdy and clean to prevent wobble or contamination.
What to look for
- Food-grade materials, with stainless steel or approved plastics where the cheese touches.
- Molds that match your batch size, with a follower that fits closely.
- Pressure range that covers your recipes, from light to heavy.
- Easy cleaning, with no hidden corners.
- Stability, so pressure stays even as the cheese settles.
Match press to batch
- A gallon or two of milk at a time: a small weight or spring press with one or two molds.
- Several gallons: a lever or multi-mold press.
- Regular selling: consider a more durable frame and multiple molds so you can press several wheels at once.
Check before you buy
Read the recipe requirements you plan to follow, because some cheeses need substantial pressure. Look at reviews from other makers and ask local cheesemaking groups. Check whether replacement parts are available. Penn State Extension and ATTRA offer starting points on small-scale processing. If you plan to sell, confirm equipment requirements with your state agriculture department, since some regulators have rules about materials used in a licensed dairy.
Cleaning and care
Whatever press you choose, plan on cleaning it well after each use. Remove cloths, rinse off whey and curd, wash with hot soapy water and sanitize. Dry everything completely, because damp wood and crevices grow mold. Check springs, screws and joints regularly for rust or wear, and replace worn parts promptly. If the press has wooden parts, keep them sealed and away from direct contact with the cheese. A press that is easy to clean gets cleaned. One that is difficult becomes a storage rack, so choose the easy one.
Try before you commit
If you can, test a press before buying. Visit a cheesemaking class, a local guild or a friend who makes cheese, and ask to see what they use. Notice what annoys them. A press that looks good in a catalog can be awkward to load or clean. Ask about warranty, parts and who to call if something breaks, and think about whether you could make a simple version yourself.
A good press lasts for decades, which means you'll eventually get the family heirloom nobody asked for.