Which processing methods improve starch digestibility?

Break the kernel, not the budget

AMARILLO, Texas — The methods that improve starch digestibility are the ones that break the kernel's tough outer coat and expose the starch to rumen microbes: fine grinding or rolling dry grain, steam flaking, ensiling high-moisture grain, and properly processing corn silage kernels at harvest. Corn and sorghum starch are protected by a hard seed coat and a protein matrix. When whole kernels slip through the cow, you've paid for energy that ended up in the manure.

Corn silage kernel processing

At chopping, kernel processors with rolls set close together crack and smash kernels. Roll gap, roll speed differential and theoretical length of cut all affect results. Ask your chopper operator or custom harvester what the rolls were set at and how often they're checked, since rolls wear and gaps drift. Test the result with a kernel processing score or with a simple kernel check from a sample, and adjust the next field. Your extension dairy specialist can show you the method; UW Extension has dairy forage resources.

Dry grain: grind or roll

For dry corn, a finer grind generally raises ruminal starch digestion, but go too fine and you can push acidosis risk up and lose dust and feed. Rolled corn tends to be coarser. The right choice depends on how much starch the ration carries and how fast the other feeds ferment in the rumen. A nutritionist can set a target particle size and help you check it by sieve. Make sure the hammer mill or roller mill is maintained; worn screens or rolls turn good intentions into inconsistent product.

Steam flaking and heat processing

Steam flaking, common in feedlots, uses heat and moisture to gelatinize starch before rolling it flat. It raises digestibility, but it needs equipment and energy that most dairies don't have, and the cost may not pay on a small herd. Where flaked corn is available from a mill, ask your nutritionist how it compares in cost per unit of digestible energy against ground corn. The National Academies' Nutrient Requirements of Dairy Cattle framework is the standard reference for how these feeds are valued; your nutritionist can show how.

High-moisture and ensiled grain

Ensiling corn at high moisture lets fermentation break down the protein matrix around starch. Starch availability in high-moisture corn generally increases with time in storage, which is why newly ensiled grain and old grain behave differently in the ration. If you feed high-moisture corn, plan around that change and test it. See our piece on feeding high-moisture corn for handling details.

Match processing to the whole ration

More digestible starch isn't always better. Rations with high starch and low effective fiber risk sub-acute rumen acidosis, which shows up as off-feed cows, loose manure and drops in components. The goal is the right level of fermentable starch for your herd, not the maximum. Pair processing decisions with a conversation about fiber, particle size and feeding frequency.

Questions for your nutritionist

  1. What processing would give me the best return for my corn?
  2. How do I check particle size or kernel breakage on farm?
  3. How should the ration change if I switch to finer grinding?
  4. What does a ruminal starch digestibility test cost and is it worth it here?

The cheap fix is usually a clean set of rolls and a sieve. Check both before spending on new equipment.