Which sanitizers suit dairy surfaces?

Chlorine, acid and peracetic options

APPLETON, Wisconsin — The sanitizers that suit dairy surfaces are the ones labeled for food-contact use in dairy, matched to the surface, the water and the job. Common choices are chlorine-based products, acid anionic sanitizers, quaternary ammonium compounds and peracetic acid. Each has strengths and drawbacks. None works on a dirty surface, so sanitizer comes after cleaning, never instead of it.

Chlorine-based sanitizers

Chlorine products are inexpensive, work quickly and are effective against many microbes. They can corrode some metals, especially if too strong or left on too long, and their effectiveness drops with high pH and organic soil. Use the label concentration and test it with strips. Never mix chlorine with acid products.

Acid anionic sanitizers

These work well in the acid range, help with mineral films, and are less corrosive than chlorine on stainless steel at label strengths. They can be less effective on some microbes at cold temperatures, and they foam in some systems. They're often used as a final rinse in milking systems and plants.

Quaternary ammonium compounds

Quats leave a residual film and are less affected by organic soil. They can leave residues that interfere with starter cultures, so they're a poor fit around cheese and yogurt making unless the label and your regulator allow it. Ask before using them in a processing area.

Peracetic acid

Peracetic acid products work against a wide range of microbes, break down into harmless products, and perform at lower temperatures. They need careful handling, since concentrated forms can burn skin and eyes, and they require good ventilation.

Pick by situation

  1. Check that the product is labeled for food-contact surfaces in dairy.
  2. Match it to your water hardness and pH.
  3. Check compatibility with stainless steel, rubber and plastic parts.
  4. Consider rinse requirements. Some need rinsing, others don't, per the label.
  5. Think about worker safety and ventilation.

Regulation and safety

Sanitizers are regulated products, and the label is the law. The EPA pesticide page explains registration and label rules. Read the label for concentration, contact time and any rinse requirement. Store chemicals separately, keep safety data sheets close and use gloves and eye protection. The OSHA agriculture page covers workplace chemical safety. Your state dairy regulator may also have approved lists and rules for your operation.

Test strength, rotate if advised

Check concentration with test strips matched to the chemical. Some plants rotate sanitizers to avoid microbial resistance, though guidance on that varies, so ask your chemical supplier and regulator. eXtension and the FSIS offer sanitation resources for dairy and food plants.

Mind the water and the soil

Sanitizers work only on clean surfaces. Leftover milk, fat or detergent shields microbes and uses up the chemical. Water hardness, pH and temperature change how sanitizers perform. Chlorine works best in a narrow pH window, while acid sanitizers are made for low pH. Ask your chemical supplier to check your water and recommend a product that fits. Never assume a product that worked on a friend's farm will work in your plant.

Rinse and residue

Some sanitizers are no-rinse at label strength, while others need a potable water rinse. Residues matter most in cheese, yogurt and other cultured products, where sanitizer can interfere with starter cultures. If a culture suddenly performs poorly, check your sanitizer and rinse practices first.

Rotate and review with your supplier

A good chemical supplier will review your sanitation program on site, check your water, test your strengths and suggest a plan. Ask for a written program that lists each product, concentration, contact time and where it's used. Review it once a year or after any change to equipment or water supply. Keep the written program next to your logs so an inspector can see the whole picture at once.

Keep hand sanitizing separate

Hand sanitizers and equipment sanitizers are different products with different labels. Don't dip hands in equipment sanitizer, and don't wipe surfaces with a hand product. Keep each in its own labeled container at the point of use, so nobody has to guess.

Choose the product the label supports, use it at the strength the label states, and test it. Everything else is detail.