Which woods are safe for smoking cheese?

Hardwoods yes, softwoods never

ROANOKE, Virginia — Hardwoods from fruit and nut trees, plus a few others like oak, maple and alder, are the standard safe choices for smoking cheese, and softwoods and treated lumber are not. Apple, cherry, hickory, pecan, maple, oak and alder all show up regularly in cheese smoking. What matters more than the species is that the wood is clean, untreated and meant for smoking. Pine, cedar, fir, spruce and other resinous woods carry sap that gives a bitter taste and can leave harsh residues. If you wouldn't want to chew on it, don't burn it near your cheese.

The usual safe choices

Here are the woods most smokers reach for.

Match intensity to cheese. A mild young cheese can disappear under heavy hickory, and a sharp aged cheddar can stand up to it.

What to avoid

Skip any softwood, including pine, spruce, fir and cedar. These carry resin that tastes bad and may bring unwanted compounds into the smoke. Don't use lumber scraps, pallets, painted or stained wood, pressure-treated boards, plywood or anything that came with glue, finish or chemical treatment. Pallets in particular can carry treatments you can't see.

Wet, moldy or rotten wood is another no. It smolders dirty and can put off foul smoke. If you're cutting your own, season it properly and keep it dry.

Chips, pellets, dust and chunks

For cold smoking, fine material burns slowly with less heat. Fine sawdust and small pellets are common in smoke generators and tubes. Chunks and large chips are better in hot smokers but can produce too much heat for cheese.

Buy products that are labeled for food use and sold for smoking. Check the ingredients if you buy pellets, since some blends include oils or fillers, and look for plain wood. Store them dry in a sealed container.

Smoke quality and cheese

The best smoke is thin and almost blue. Thick white smoke can leave a bitter, sooty taste on cheese. If your fire smolders and chokes, open the vents a bit or change the material. Keep the cheese cold and the smoke gentle.

Test small. Smoke a bar of cheese with one wood, label it, and compare it against a second wood. Taste after the cheese has rested for a week in the fridge. That gives you honest data.

Matching wood to cheese

Pairing is mostly taste and patience. Mild cheeses such as Monterey Jack, young cheddar and mozzarella-style curds pick up smoke quickly, so a light wood like apple or alder for a short time works best. Sharp cheddar, Gouda and provolone take heavier woods like hickory or oak.

Blending is common. A split of apple and hickory gives a rounded flavor without the harsh edge hickory can have alone. Pecan sits between the two in strength.

Keep notes of the wood, amount, time and temperature for each batch. Smoke strength varies with humidity and wind, so the same recipe can taste different from one day to the next. Smoke a small test first, rest it, taste it, and adjust. That habit is cheaper than a freezer full of bitter cheese.

Storing and handling wood

Keep wood chips, pellets and dust in a dry, closed bin off the floor, away from fuel, paint and pesticides, since wood absorbs smells. Discard anything damp, musty or moldy. Never reuse ash-fouled chips. If you cut your own wood, strip the bark if it's loose and moldy, and let the wood dry for a good while before it goes near cheese.

Where to read more

Extension services answer many smoking and food handling questions. Check Penn State Extension and Cornell Small Farms. If you sell smoked cheese, ask your state dairy regulator about processing rules and review the USDA Food Safety and Inspection Service. For marketing ideas on value-added farm foods, see the Agricultural Marketing Resource Center.

A cheap apple tree that quit producing is good for something after all.